Metadata-Version: 2.1
Name: mutmut
Version: 2.4.4
Summary: mutation testing for Python 3
Home-page: https://github.com/boxed/mutmut
Author: Anders Hovmöller
Author-email: boxed@killingar.net
License: BSD
Description: mutmut - python mutation tester
        ===============================
        
        .. image:: https://travis-ci.org/boxed/mutmut.svg?branch=master
            :target: https://travis-ci.org/boxed/mutmut
        
        .. image:: https://readthedocs.org/projects/mutmut/badge/?version=latest
            :target: https://mutmut.readthedocs.io/en/latest/?badge=latest
            :alt: Documentation Status
        
        .. image:: https://codecov.io/gh/boxed/mutmut/branch/master/graph/badge.svg
          :target: https://codecov.io/gh/boxed/mutmut
        
        .. image:: https://img.shields.io/discord/767914934016802818.svg
          :target: https://discord.gg/cwb9uNt
        
        Mutmut is a mutation testing system for Python, with a strong focus on ease
        of use. If you don't know what mutation testing is try starting with
        `this article <https://hackernoon.com/mutmut-a-python-mutation-testing-system-9b9639356c78>`_.
        
        Some highlight features:
        
        - Found mutants can be applied on disk with a simple command making it very
          easy to work with the results
        - Remembers work that has been done, so you can work incrementally
        - Supports all test runners (because mutmut only needs an exit code from the
          test command)
        - If you use the `hammett <https://github.com/boxed/hammett>`_ test runner
          you can go extremely fast! There's special handling for this runner
          that has some pretty dramatic results.
        - Can use coverage data to only do mutation testing on covered lines
        - Battle tested on real libraries by multiple companies
        
        
        If you need to run mutmut on a python 2 code base use mutmut ``1.5.0``. Mutmut
        ``1.9.0`` is the last version to support python ``3.4``, ``3.5`` and ``3.6``.
        
        
        Install and run
        ---------------
        
        You can get started with a simple:
        
        .. code-block:: console
        
            pip install mutmut
            mutmut run
        
        This will by default run pytest (or unittest if pytest is unavailable)
        on tests in the "tests" or "test" folder and
        it will try to figure out where the code to mutate lies. Run
        
        .. code-block:: console
        
            mutmut --help
        
        for the available flags, to use other runners, etc. The recommended way to use
        mutmut if the defaults aren't working for you is to add a block in ``setup.cfg``.
        Then when you come back to mutmut weeks later you don't have to figure out the
        flags again, just run ``mutmut run`` and it works. Like this:
        
        .. code-block:: ini
        
            [mutmut]
            paths_to_mutate=src/
            backup=False
            runner=python -m hammett -x
            tests_dir=tests/
            dict_synonyms=Struct, NamedStruct
        
        To use multiple paths either in the ``paths_to_mutate`` or ``tests_dir`` option
        use a comma or colon separated list. For example:
        
        .. code-block:: ini
        
            [mutmut]
            paths_to_mutate=src/,src2/
            tests_dir=tests/:tests2/
        
        You can stop the mutation run at any time and mutmut will restart where you
        left off. It's also smart enough to retest only the surviving mutants when the
        test suite changes.
        
        To print the results run ``mutmut show``. It will give you a list of the mutants
        grouped by file. You can now look at a specific mutant diff with ``mutmut show 3``,
        all mutants for a specific file with ``mutmut show path/to/file.py`` or all mutants
        with ``mutmut show all``.
        
        
        You can also write a mutant to disk with ``mutmut apply 3``. You should **REALLY**
        have the file you mutate under source code control and committed before you apply
        a mutant!
        
        
        Whitelisting
        ------------
        
        You can mark lines like this:
        
        .. code-block:: python
        
            some_code_here()  # pragma: no mutate
        
        to stop mutation on those lines. Some cases we've found where you need to
        whitelist lines are:
        
        - The version string on your library. You really shouldn't have a test for this :P
        - Optimizing break instead of continue. The code runs fine when mutating break
          to continue, but it's slower.
        
        See also `Advanced whitelisting and configuration`_
        
        
        Example mutations
        -----------------
        
        - Integer literals are changed by adding 1. So 0 becomes 1, 5 becomes 6, etc.
        - ``<`` is changed to ``<=``
        - break is changed to continue and vice versa
        
        In general the idea is that the mutations should be as subtle as possible.
        See ``__init__.py`` for the full list.
        
        
        Workflow
        --------
        
        This section describes how to work with mutmut to enhance your test suite.
        
        1. Run mutmut with ``mutmut run``. A full run is preferred but if you're just
           getting started you can exit in the middle and start working with what you
           have found so far.
        2. Show the mutants with ``mutmut results``
        3. Apply a surviving mutant to disk running ``mutmut apply 3`` (replace 3 with
           the relevant mutant ID from ``mutmut results``)
        4. Write a new test that fails
        5. Revert the mutant on disk
        6. Rerun the new test to see that it now passes
        7. Go back to point 2.
        
        Mutmut keeps a result cache in ``.mutmut-cache`` so if you want to make sure you
        run a full mutmut run just delete this file.
        
        If you want to re-run all survivors after changing a lot of code or even the configuration,
        you can use `for ID in $(mutmut result-ids survived); do mutmut run $ID; done` (for bash).
        
        You can also tell mutmut to just check a single mutant:
        
        .. code-block:: console
        
            mutmut run 3
        
        
        Advanced whitelisting and configuration
        ---------------------------------------
        
        mutmut has an advanced configuration system. You create a file called
        ``mutmut_config.py``. You can define two functions there: ``init()`` and
        ``pre_mutation(context)``. ``init`` gets called when mutmut starts and
        ``pre_mutation`` gets called before each mutant is applied and tested. You can
        mutate the ``context`` object as you need. You can modify the test command like
        this:
        
        .. code-block:: python
        
            def pre_mutation(context):
                context.config.test_command = 'python -m pytest -x ' + something_else
        
        or skip a mutant:
        
        .. code-block:: python
        
            def pre_mutation(context):
                if context.filename == 'foo.py':
                    context.skip = True
        
        or skip logging:
        
        
        .. code-block:: python
        
            def pre_mutation(context):
                line = context.current_source_line.strip()
                if line.startswith('log.'):
                    context.skip = True
        
        look at the code for the ``Context`` class for what you can modify. Please
        open a github issue if you need help.
        
        It is also possible to disable mutation of specific node types by passing the
        ``--disable-mutation-types`` option. Multiple types can be specified by separating them
        by comma:
        
        .. code-block:: console
        
            mutmut run --disable-mutation-types=string,decorator
        
        Inversely, you can also only specify to only run specific mutations with ``--enable-mutation-types``.
        Note that ``--disable-mutation-types`` and ``--enable-mutation-types`` are exclusive and cannot
        be combined.
        
        
        Selecting tests to run
        ----------------------
        
        If you have a large test suite or long running tests, it can be beneficial to narrow the set of tests to
        run for each mutant down to the tests that have a chance of killing it.
        Determining the relevant subset of tests depends on your project, its structure, and the metadata that you
        know about your tests.
        ``mutmut`` provides information like the file to mutate and `coverage contexts <https://coverage.readthedocs.io/en/coverage-5.5/contexts.html>`_
        (if used with the ``--use-coverage`` switch).
        You can set the ``context.config.test_command`` in the ``pre_mutation(context)`` hook of ``mutmut_config.py``.
        The ``test_command`` is reset after each mutant, so you don't have to explicitly (re)set it for each mutant.
        
        This section gives examples to show how this could be done for some concrete use cases.
        All examples use the default test runner (``python -m pytest -x --assert=plain``).
        
        Selection based on source and test layout
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
        
        If the location of the test module has a strict correlation with your source code layout, you can simply
        construct the path to the corresponding test file from ``context.filename``.
        Suppose your layout follows the following structure where the test file is always located right beside the
        production code:
        
        .. code-block:: console
        
            mypackage
            ├── production_module.py
            ├── test_production_module.py
            └── subpackage
                ├── submodule.py
                └── test_submodule.py
        
        Your ``mutmut_config.py`` in this case would look like this:
        
        .. code-block:: python
        
            import os.path
        
            def pre_mutation(context):
                dirname, filename = os.path.split(context.filename)
                testfile = "test_" + filename
                context.config.test_command += ' ' + os.path.join(dirname, testfile)
        
        Selection based on imports
        ^^^^^^^^^^^^^^^^^^^^^^^^^^
        
        If you can't rely on the directory structure or naming of the test files, you may assume that the tests most likely
        to kill the mutant are located in test files that directly import the module that is affected by the mutant.
        Using the ``ast`` module of the Python standard library, you can use the ``init()`` hook to build a map which test file
        imports which module, and then lookup all test files importing the mutated module and only run those:
        
        .. code-block:: python
        
            import ast
            from pathlib import Path
        
            test_imports = {}
        
        
            class ImportVisitor(ast.NodeVisitor):
                """Visitor which records which modules are imported."""
                def __init__(self) -> None:
                    super().__init__()
                    self.imports = []
        
                def visit_Import(self, node: ast.Import) -> None:
                    for alias in node.names:
                        self.imports.append(alias.name)
        
                def visit_ImportFrom(self, node: ast.ImportFrom) -> None:
                    self.imports.append(node.module)
        
        
            def init():
                """Find all test files located under the 'tests' directory and create an abstract syntax tree for each.
                Let the ``ImportVisitor`` find out what modules they import and store the information in a global dictionary
                which can be accessed by ``pre_mutation(context)``."""
                test_files = (Path(__file__).parent / "tests").rglob("test*.py")
                for fpath in test_files:
                    visitor = ImportVisitor()
                    visitor.visit(ast.parse(fpath.read_bytes()))
                    test_imports[str(fpath)] = visitor.imports
        
        
            def pre_mutation(context):
                """Construct the module name from the filename and run all test files which import that module."""
                tests_to_run = []
                for testfile, imports in test_imports.items():
                    module_name = context.filename.rstrip(".py").replace("/", ".")
                    if module_name in imports:
                        tests_to_run.append(testfile)
                context.config.test_command += f"{' '.join(tests_to_run)}"
        
        Selection based on coverage contexts
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
        
        If you recorded `coverage contexts <https://coverage.readthedocs.io/en/coverage-5.5/contexts.html>`_ and use
        the ``--use-coverage`` switch, you can access this coverage data inside the ``pre_mutation(context)`` hook
        via the ``context.config.coverage_data`` attribute. This attribute is a dictionary in the form
        ``{filename: {lineno: [contexts]}}``.
        
        Let's say you have used the built-in dynamic context option of ``Coverage.py`` by adding the following to
        your ``.coveragerc`` file:
        
        .. code-block:: console
        
            [run]
            dynamic_context = test_function
        
        ``coverage`` will create a new context for each test function that you run in the form ``module_name.function_name``.
        With ``pytest``, we can use the ``-k`` switch to filter tests that match a given expression.
        
        .. code-block:: python
        
            import os.path
        
            def pre_mutation(context):
                """Extract the coverage contexts if possible and only run the tests matching this data."""
                if not context.config.coverage_data:
                    # mutmut was run without ``--use-coverage``
                    return
                fname = os.path.abspath(context.filename)
                contexts_for_file = context.config.coverage_data.get(fname, {})
                contexts_for_line = contexts_for_file.get(context.current_line_index, [])
                test_names = [
                    ctx.rsplit(".", 1)[-1]  # extract only the final part after the last dot, which is the test function name
                    for ctx in contexts_for_line
                    if ctx  # skip empty strings
                ]
                if not test_names:
                    return
                context.config.test_command += f' -k "{" or ".join(test_names)}"'
        
        Pay attention that the format of the context name varies depending on the tool you use for creating the contexts.
        For example, the ``pytest-cov`` plugin uses ``::`` as separator between module and test function.
        Furthermore, not all tools are able to correctly pick up the correct contexts. ``coverage.py`` for instance is (at the time of writing)
        unable to pick up tests that are inside a class when using ``pytest``.
        You will have to inspect your ``.coverage`` database using the `Coverage.py API <https://coverage.readthedocs.io/en/coverage-5.5/api.html>`_
        first to determine how you can extract the correct information to use with your test runner.
        
        Making things more robust
        ^^^^^^^^^^^^^^^^^^^^^^^^^
        
        Despite your best efforts in picking the right subset of tests, it may happen that the mutant survives because the test which is able
        to kill it was not included in the test set. You can tell ``mutmut`` to re-run the full test suite in that case, to verify that this
        mutant indeed survives.
        You can do so by passing the ``--rerun-all`` option to ``mutmut run``. This option is disabled by default.
        
        
        JUnit XML support
        -----------------
        
        In order to better integrate with CI/CD systems, ``mutmut`` supports the
        generation of a JUnit XML report (using https://pypi.org/project/junit-xml/).
        This option is available by calling ``mutmut junitxml``. In order to define how
        to deal with suspicious and untested mutants, you can use
        
        .. code-block:: console
        
            mutmut junitxml --suspicious-policy=ignore --untested-policy=ignore
        
        The possible values for these policies are:
        
        - ``ignore``: Do not include the results on the report at all
        - ``skipped``: Include the mutant on the report as "skipped"
        - ``error``: Include the mutant on the report as "error"
        - ``failure``: Include the mutant on the report as "failure"
        
        If a failed mutant is included in the report, then the unified diff of the
        mutant will also be included for debugging purposes.
        
Keywords: mutmut mutant mutation test testing
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: BSD License
Classifier: Natural Language :: English
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.7
Requires-Python: >=3.7
Provides-Extra: pytest
Provides-Extra: coverage
Provides-Extra: patch
