{"project information": "Example file for ANYstructure\n", "theme": "default", "point_dict": {"point1": [0.0, 0.0], "point2": [4.0, 0.0], "point3": [7.9, 0.0], "point4": [11.7, 0.0], "point5": [15.399999999999999, 0.0], "point6": [19.0, 0.0], "point7": [22.5, 0.0], "point8": [26.3, 0.0], "point9": [30.1, 0.0], "point10": [34.1, 0.0], "point12": [0.0, 2.5], "point13": [4.0, 2.5], "point14": [7.9, 2.5], "point15": [11.7, 2.5], "point16": [15.399999999999999, 2.5], "point17": [19.0, 2.5], "point18": [22.5, 2.5], "point19": [26.3, 2.5], "point20": [30.1, 2.5], "point21": [34.1, 2.5], "point22": [37.1, 2.5], "point23": [34.1, 5.5], "point24": [34.1, 8.7], "point25": [37.1, 5.5], "point26": [37.1, 8.7], "point27": [34.1, 12.1], "point28": [37.1, 12.1], "point29": [34.1, 15.5], "point30": [37.1, 15.5], "point31": [34.1, 19.1], "point32": [37.1, 19.1], "point33": [37.1, 22.900000000000002], "point34": [34.1, 22.900000000000002], "point35": [37.1, 26.900000000000002], "point36": [34.1, 26.900000000000002], "point37": [11.7, 5.5], "point38": [11.7, 8.7], "point39": [11.7, 12.1], "point40": [11.7, 15.5], "point41": [11.7, 19.1], "point42": [11.7, 22.900000000000002], "point43": [11.7, 26.900000000000002], "point44": [11.7, 30.900000000000002], "point45": [34.1, 30.900000000000002], "point46": [37.1, 30.900000000000002], "point47": [0.0, 30.9], "point48": [4.0, 30.9], "point49": [7.9, 30.9], "point50": [15.399999999999999, 30.900000000000002], "point51": [19.0, 30.900000000000002], "point52": [22.5, 30.900000000000002], "point53": [26.3, 30.900000000000002], "point54": [30.1, 30.900000000000002], "point11": [14.1, 26.900000000000002], "point55": [14.1, 22.900000000000002], "point56": [14.1, 19.1], "point57": [14.1, 15.5], "point58": [14.1, 12.1], "point59": [14.1, 8.7], "point60": [14.1, 5.5]}, "line_dict": {"line1": [1, 12], "line2": [47, 12], "line3": [1, 2], "line4": [3, 2], "line5": [3, 4], "line6": [5, 4], "line7": [5, 6], "line8": [7, 6], "line9": [7, 8], "line10": [9, 8], "line11": [9, 10], "line13": [12, 13], "line14": [14, 13], "line15": [14, 15], "line16": [16, 15], "line17": [16, 17], "line18": [18, 17], "line19": [18, 19], "line20": [20, 19], "line21": [20, 21], "line22": [22, 21], "line23": [15, 37], "line24": [38, 37], "line25": [38, 39], "line26": [40, 39], "line27": [40, 41], "line28": [42, 41], "line29": [42, 43], "line30": [44, 43], "line31": [47, 48], "line32": [49, 48], "line33": [49, 44], "line34": [50, 44], "line35": [50, 51], "line36": [52, 51], "line37": [52, 53], "line38": [54, 53], "line39": [54, 45], "line40": [46, 45], "line12": [10, 22], "line41": [20, 23], "line42": [21, 23], "line44": [27, 24], "line45": [27, 29], "line46": [31, 29], "line47": [31, 34], "line48": [36, 34], "line49": [36, 45], "line50": [22, 25], "line51": [26, 25], "line52": [26, 28], "line53": [30, 28], "line54": [30, 32], "line55": [33, 32], "line56": [33, 35], "line57": [46, 35], "line58": [2, 13], "line59": [3, 14], "line60": [4, 15], "line61": [5, 16], "line62": [6, 17], "line63": [7, 18], "line64": [8, 19], "line65": [9, 20], "line66": [10, 21], "line67": [23, 25], "line68": [24, 26], "line69": [28, 27], "line70": [30, 29], "line71": [32, 31], "line72": [33, 34], "line73": [35, 36], "line43": [23, 24], "line74": [11, 43], "line75": [55, 42], "line76": [56, 41], "line77": [57, 40], "line78": [58, 39], "line79": [59, 38], "line80": [60, 37]}, "structure_properties": {"line3": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.7, "MPa"], "sigma_x2": [101.7, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.7, "MPa"], "sigma_x2": [101.7, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line4": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.9, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [100.5, "MPa"], "sigma_x2": [100.5, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.9, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [100.5, "MPa"], "sigma_x2": [100.5, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line5": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [102.7, "MPa"], "sigma_x2": [102.7, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [102.7, "MPa"], "sigma_x2": [102.7, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line6": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.7, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [102.7, "MPa"], "sigma_x2": [102.7, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.7, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [102.7, "MPa"], "sigma_x2": [102.7, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line7": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.012, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.5, "MPa"], "sigma_x2": [101.5, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.012, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.5, "MPa"], "sigma_x2": [101.5, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line8": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.5, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.012, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.5, "MPa"], "sigma_x2": [101.5, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.5, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.25, "m"], "stf_flange_thk": [0.012, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [101.5, "MPa"], "sigma_x2": [101.5, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line9": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [100.7, "MPa"], "sigma_x2": [100.7, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [100.7, "MPa"], "sigma_x2": [100.7, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line10": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.8, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.8, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line11": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line12": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.90512, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.90512, "m"], "spacing": [0.75, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["BOTTOM", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [50.0, "MPa"], "sigma_x2": [50.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line50": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line51": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.1999999999999993, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.1999999999999993, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line52": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line53": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.2, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line54": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line55": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line56": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line57": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.34, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["SIDE_SHELL", ""], "stf_type": ["T", ""], "sigma_y1": [100.0, "MPa"], "sigma_y2": [100.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line31": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line32": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.9000000000000004, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.9000000000000004, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line33": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.799999999999999, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.799999999999999, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line34": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.7, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.7, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line35": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.6, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.6, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line36": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.012, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line37": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line38": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line39": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line40": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.014, "m"], "structure_type": ["MD", ""], "stf_type": ["T", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [3.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line13": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line14": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line15": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [4.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.02, "m"], "stf_web_height": [0.45, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line16": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6999999999999993, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6999999999999993, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line17": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line18": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.5, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.5, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line19": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line20": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.775, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.375, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.018, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line41": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [5.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.025, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [5.0, "m"], "spacing": [0.775, "m"], "plate_thk": [0.025, "m"], "stf_web_height": [0.5, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.025, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line43": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.1999999999999993, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.1999999999999993, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line44": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line45": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4000000000000004, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line46": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line47": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line48": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line49": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.325, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.016, "m"], "structure_type": ["INNER_SIDE", ""], "stf_type": ["T", ""], "sigma_y1": [80.0, "MPa"], "sigma_y2": [80.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line58": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line59": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line61": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line62": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line63": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line64": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line65": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line66": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line21": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line42": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line22": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line67": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line68": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line69": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line70": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line71": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line72": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line73": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line60": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line1": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["INTERNAL_LOW_STRESS_WT", ""], "stf_type": ["FB", ""], "sigma_y1": [40.0, "MPa"], "sigma_y2": [40.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [20.0, "MPa"], "sigma_x2": [20.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [2.5, "m"], "spacing": [0.7, "m"], "plate_thk": [0.014, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["INTERNAL_LOW_STRESS_WT", ""], "stf_type": ["FB", ""], "sigma_y1": [40.0, "MPa"], "sigma_y2": [40.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [20.0, "MPa"], "sigma_x2": [20.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line2": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.03, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["INTERNAL_LOW_STRESS_WT", ""], "stf_type": ["T", ""], "sigma_y1": [40.0, "MPa"], "sigma_y2": [40.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "panel or shell": "panel", "sigma_x1": [20.0, "MPa"], "sigma_x2": [20.0, "MPa"]}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "mat_factor": [1.15, ""], "span": [3.0, "m"], "spacing": [0.7, "m"], "plate_thk": [0.03, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["INTERNAL_LOW_STRESS_WT", ""], "stf_type": ["T", ""], "sigma_y1": [40.0, "MPa"], "sigma_y2": [40.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "panel or shell": "panel", "sigma_x1": [20.0, "MPa"], "sigma_x2": [20.0, "MPa"]}, "Girder": null}, "line23": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line24": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.2, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.2, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line25": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.35, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line26": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.4, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.4, "m"], "spacing": [0.75, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line27": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.6000000000000014, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line28": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [3.8000000000000007, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.32, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line29": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.3, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.3, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line30": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["ultimate", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, stiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.3, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Stiffener": {"mat_yield": [355000000.0, "Pa"], "span": [4.0, "m"], "spacing": [0.75, "m"], "plate_thk": [0.015, "m"], "stf_web_height": [0.3, "m"], "stf_web_thk": [0.012, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "structure_type": ["GENERAL_INTERNAL_WT", ""], "stf_type": ["T", ""], "sigma_y1": [90.0, "MPa"], "sigma_y2": [90.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, " "], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [40.0, "MPa"], "sigma_x2": [40.0, "MPa"], "panel or shell": "panel"}, "Girder": null}, "line80": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line79": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line78": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line77": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line76": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line75": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}, "line74": {"main dict": {"minimum pressure in adjacent spans": [null, ""], "material yield": [355000000.0, "Pa"], "load factor on stresses": [1, ""], "load factor on pressure": [1, ""], "buckling method": [["buckling", ""], ""], "stiffener end support": ["Continuous", ""], "girder end support": ["Continuous", ""], "tension field": ["not allowed", ""], "plate effective agains sigy": [true, ""], "buckling length factor stf": [null, ""], "buckling length factor girder": [null, ""], "km3": [12, ""], "km2": [24, ""], "girder distance between lateral support": [null, ""], "stiffener distance between lateral support": [null, ""], "panel length, Lp": [null, ""], "pressure side": ["both sides", ""], "fabrication method stiffener": ["welded", ""], "fabrication method girder": ["welded", ""], "calculation domain": ["Flat plate, unstiffened", ""]}, "Plate": {"mat_yield": [355000000.0, "Pa"], "span": [2.4000000000000004, "m"], "spacing": [0.8, "m"], "plate_thk": [0.018, "m"], "stf_web_height": [0.25, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.0, "m"], "stf_flange_thk": [0.0, "m"], "structure_type": ["FRAME", ""], "stf_type": ["FB", ""], "sigma_y1": [70.0, "MPa"], "sigma_y2": [70.0, "MPa"], "tau_xy": [10.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["plate side", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["buckling", ""], "puls boundary": ["GL", ""], "puls stiffener end": ["Continuous", ""], "puls sp or up": ["UP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [60.0, "MPa"], "sigma_x2": [60.0, "MPa"], "panel or shell": "panel"}, "Stiffener": null, "Girder": null}}, "shell structure properties": {"line3": null, "line4": null, "line5": null, "line6": null, "line7": null, "line8": null, "line9": null, "line10": null, "line11": null, "line12": null, "line50": null, "line51": null, "line52": null, "line53": null, "line54": null, "line55": null, "line56": null, "line57": null, "line31": null, "line32": null, "line33": null, "line34": null, "line35": null, "line36": null, "line37": null, "line38": null, "line39": null, "line40": null, "line13": null, "line14": null, "line15": null, "line16": null, "line17": null, "line18": null, "line19": null, "line20": null, "line41": null, "line43": null, "line44": null, "line45": null, "line46": null, "line47": null, "line48": null, "line49": null, "line58": null, "line59": null, "line61": null, "line62": null, "line63": null, "line64": null, "line65": null, "line66": null, "line21": null, "line42": null, "line22": null, "line67": null, "line68": null, "line69": null, "line70": null, "line71": null, "line72": null, "line73": null, "line60": null, "line1": null, "line2": {"Main class": {"sasd": [46036553.786911875, "Pa"], "smsd": [194878168.26868436, "Pa"], "tTsd": [12732395.447351627, "Pa"], "tQsd": [4774648.292756859, "Pa"], "psd": [-200000.0, "Pa"], "shsd": [0.0, "Pa"], "geometry": [3, ""], "material factor": [1.15, ""], "delta0": [0.005, ""], "fab method ring stf": [1, "-"], "fab method ring girder": [2, "-"], "E-module": [210000000000.0, "Pa"], "poisson": [0.3, "-"], "mat_yield": [355000000.0, "Pa"], "length between girders": [2.5, "m"], "panel spacing, s": [2.0, "m"], "ring stf excluded": [false, ""], "ring frame excluded": [false, ""], "end cap pressure": ["not included in axial force", ""], "ULS or ALS": ["ULS", ""]}, "Shell": {"plate_thk": [0.02, "m"], "radius": [5.0, "m"], "distance between rings, l": [5.0, "m"], "length of shell, L": [5.0, "m"], "tot cyl length, Lc": [5.0, "m"], "eff. buckling lenght factor": [1.0, "m"], "mat_yield": [355000000.0, "Pa"]}, "Long. stf.": {"spacing": [0.7, "m"], "stf_web_height": [0.4, "m"], "stf_web_thk": [0.018, "m"], "stf_flange_width": [0.15, "m"], "stf_flange_thk": [0.02, "m"], "stf_type": ["T", ""], "span": [3.0, "m"], "mat_yield": [355000000.0, "Pa"], "panel or shell": ["shell", ""], "plate_thk": [0.03, "m"], "structure_type": ["INTERNAL_LOW_STRESS_WT", ""], "sigma_y1": [40.0, "MPa"], "sigma_y2": [40.0, "MPa"], "tau_xy": [5.0, "MPa"], "plate_kpp": [1.0, ""], "stf_kps": [1.0, ""], "stf_km1": [12.0, ""], "stf_km2": [24.0, ""], "stf_km3": [12.0, ""], "press_side": ["p", ""], "structure_types": [{"vertical": ["BBS", "SIDE_SHELL", "SSS"], "horizontal": ["BOTTOM", "BBT", "HOPPER", "MD"], "non-wt": ["FRAME", "GENERAL_INTERNAL_NONWT"], "internals": ["INNER_SIDE", "FRAME_WT", "GENERAL_INTERNAL_WT", "INTERNAL_ZERO_STRESS_WT", "INTERNAL_LOW_STRESS_WT"]}, ""], "zstar_optimization": [true, ""], "puls buckling method": ["ultimate", ""], "puls boundary": ["Int", ""], "puls stiffener end": ["C", ""], "puls sp or up": ["SP", ""], "puls up boundary": ["SSSS", ""], "mat_factor": [1.15, ""], "sigma_x1": [20.0, "MPa"], "sigma_x2": [20.0, "MPa"]}, "Ring stf.": null, "Ring frame": null}, "line23": null, "line24": null, "line25": null, "line26": null, "line27": null, "line28": null, "line29": null, "line30": null, "line80": null, "line79": null, "line78": null, "line77": null, "line76": null, "line75": null, "line74": null}, "load_properties": {"ballast_side": [[0.0, 303.0, -3750.0, 153000.0, "ballast", null, null, null, "ballast_side", "ULS", 1, 1], ["line50", "line51", "line52", "line53", "line54", "line55"]], "ballast_bottom": [[0.0, 31.0, -83.0, 45800.0, "ballast", null, null, null, "ballast_bottom", "ULS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12"]], "loaded_static": [[null, null, null, null, "loaded", null, null, 22.0, "loaded_static", "ULS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12", "line50", "line51", "line52", "line53", "line54", "line55", "line56", "line57"]], "ballast_static": [[null, null, null, null, "ballast", null, null, 15.0, "ballast_static", "ULS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12", "line50", "line51", "line52", "line53", "line54", "line55", "line56", "line57"]], "slamming": [[0, 0, 0, 1000000.0, "slamming", null, null, null, "slamming", null, 1, 1], ["line56", "line57"]], "loaded_bottom": [[0.0, 164.0, -2580.0, 164000.0, "loaded", null, null, null, "loaded_bottom", "ULS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12"]], "loaded_bottom_FLS": [[0.0, 164.0, -2580.0, 164000.0, "loaded", null, null, null, "loaded_bottom_FLS", "FLS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12"]], "ballast_bottom_FLS": [[0.0, 31.0, -83.0, 45800.0, "ballast", null, null, null, "ballast_bottom_FLS", "FLS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12"]], "TankTest": [[null, null, null, null, "tanktest", null, null, 4.0, "TankTest", "ULS", 1, 1], ["line3", "line4", "line5", "line6", "line7", "line8", "line9", "line10", "line11", "line12", "line50", "line51"]]}, "accelerations_dict": {"static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "load_combinations": {"0": [["dnva", "line2", "comp2"], 1.2, 0.7, 1], "1": [["dnva", "line13", "comp2"], 1.2, 0.7, 1], "2": [["dnva", "line14", "comp2"], 1.2, 0.7, 1], "3": [["dnva", "line15", "comp2"], 1.2, 0.7, 1], "4": [["dnva", "line23", "comp2"], 1.2, 0.7, 1], "5": [["dnva", "line24", "comp2"], 1.2, 0.7, 1], "6": [["dnva", "line25", "comp2"], 1.2, 0.7, 1], "7": [["dnva", "line26", "comp2"], 1.2, 0.7, 1], "8": [["dnva", "line27", "comp2"], 1.2, 0.7, 1], "9": [["dnva", "line28", "comp2"], 1.2, 0.7, 1], "10": [["dnva", "line29", "comp2"], 1.2, 0.7, 1], "11": [["dnva", "line30", "comp2"], 1.2, 0.7, 1], "12": [["dnva", "line31", "comp2"], 1.2, 0.7, 1], "13": [["dnva", "line32", "comp2"], 1.2, 0.7, 1], "14": [["dnva", "line33", "comp2"], 1.2, 0.7, 1], "15": [["dnvb", "line2", "comp2"], 1.0, 1.3, 1], "16": [["dnvb", "line13", "comp2"], 1.0, 1.3, 1], "17": [["dnvb", "line14", "comp2"], 1.0, 1.3, 1], "18": [["dnvb", "line15", "comp2"], 1.0, 1.3, 1], "19": [["dnvb", "line23", "comp2"], 1.0, 1.3, 1], "20": [["dnvb", "line24", "comp2"], 1.0, 1.3, 1], "21": [["dnvb", "line25", "comp2"], 1.0, 1.3, 1], "22": [["dnvb", "line26", "comp2"], 1.0, 1.3, 1], "23": [["dnvb", "line27", "comp2"], 1.0, 1.3, 1], "24": [["dnvb", "line28", "comp2"], 1.0, 1.3, 1], "25": [["dnvb", "line29", "comp2"], 1.0, 1.3, 1], "26": [["dnvb", "line30", "comp2"], 1.0, 1.3, 1], "27": [["dnvb", "line31", "comp2"], 1.0, 1.3, 1], "28": [["dnvb", "line32", "comp2"], 1.0, 1.3, 1], "29": [["dnvb", "line33", "comp2"], 1.0, 1.3, 1], "30": [["tanktest", "line2", "comp2"], 1.0, 0.0, 1], "31": [["tanktest", "line13", "comp2"], 1.0, 0.0, 1], "32": [["tanktest", "line14", "comp2"], 1.0, 0.0, 1], "33": [["tanktest", "line15", "comp2"], 1.0, 0.0, 1], "34": [["tanktest", "line23", "comp2"], 1.0, 0.0, 1], "35": [["tanktest", "line24", "comp2"], 1.0, 0.0, 1], "36": [["tanktest", "line25", "comp2"], 1.0, 0.0, 1], "37": [["tanktest", "line26", "comp2"], 1.0, 0.0, 1], "38": [["tanktest", "line27", "comp2"], 1.0, 0.0, 1], "39": [["tanktest", "line28", "comp2"], 1.0, 0.0, 1], "40": [["tanktest", "line29", "comp2"], 1.0, 0.0, 1], "41": [["tanktest", "line30", "comp2"], 1.0, 0.0, 1], "42": [["tanktest", "line31", "comp2"], 1.0, 0.0, 1], "43": [["tanktest", "line32", "comp2"], 1.0, 0.0, 1], "44": [["tanktest", "line33", "comp2"], 1.0, 0.0, 1], "45": [["dnva", "line16", "comp3"], 1.2, 0.7, 1], "46": [["dnva", "line17", "comp3"], 1.2, 0.7, 1], "47": [["dnva", "line18", "comp3"], 1.2, 0.7, 1], "48": [["dnva", "line19", "comp3"], 1.2, 0.7, 1], "49": [["dnva", "line20", "comp3"], 1.2, 0.7, 1], "50": [["dnva", "line23", "comp3"], 1.2, 0.7, 1], "51": [["dnva", "line24", "comp3"], 1.2, 0.7, 1], "52": [["dnva", "line25", "comp3"], 1.2, 0.7, 1], "53": [["dnva", "line26", "comp3"], 1.2, 0.7, 1], "54": [["dnva", "line27", "comp3"], 1.2, 0.7, 1], "55": [["dnva", "line28", "comp3"], 1.2, 0.7, 1], "56": [["dnva", "line29", "comp3"], 1.2, 0.7, 1], "57": [["dnva", "line30", "comp3"], 1.2, 0.7, 1], "58": [["dnva", "line34", "comp3"], 1.2, 0.7, 1], "59": [["dnva", "line35", "comp3"], 1.2, 0.7, 1], "60": [["dnva", "line36", "comp3"], 1.2, 0.7, 1], "61": [["dnva", "line37", "comp3"], 1.2, 0.7, 1], "62": [["dnva", "line38", "comp3"], 1.2, 0.7, 1], "63": [["dnva", "line39", "comp3"], 1.2, 0.7, 1], "64": [["dnva", "line41", "comp3"], 1.2, 0.7, 1], "65": [["dnva", "line44", "comp3"], 1.2, 0.7, 1], "66": [["dnva", "line45", "comp3"], 1.2, 0.7, 1], "67": [["dnva", "line46", "comp3"], 1.2, 0.7, 1], "68": [["dnva", "line47", "comp3"], 1.2, 0.7, 1], "69": [["dnva", "line48", "comp3"], 1.2, 0.7, 1], "70": [["dnva", "line49", "comp3"], 1.2, 0.7, 1], "71": [["dnva", "line43", "comp3"], 1.2, 0.7, 1], "72": [["dnvb", "line16", "comp3"], 1.0, 1.3, 1], "73": [["dnvb", "line17", "comp3"], 1.0, 1.3, 1], "74": [["dnvb", "line18", "comp3"], 1.0, 1.3, 1], "75": [["dnvb", "line19", "comp3"], 1.0, 1.3, 1], "76": [["dnvb", "line20", "comp3"], 1.0, 1.3, 1], "77": [["dnvb", "line23", "comp3"], 1.0, 1.3, 1], "78": [["dnvb", "line24", "comp3"], 1.0, 1.3, 1], "79": [["dnvb", "line25", "comp3"], 1.0, 1.3, 1], "80": [["dnvb", "line26", "comp3"], 1.0, 1.3, 1], "81": [["dnvb", "line27", "comp3"], 1.0, 1.3, 1], "82": [["dnvb", "line28", "comp3"], 1.0, 1.3, 1], "83": [["dnvb", "line29", "comp3"], 1.0, 1.3, 1], "84": [["dnvb", "line30", "comp3"], 1.0, 1.3, 1], "85": [["dnvb", "line34", "comp3"], 1.0, 1.3, 1], "86": [["dnvb", "line35", "comp3"], 1.0, 1.3, 1], "87": [["dnvb", "line36", "comp3"], 1.0, 1.3, 1], "88": [["dnvb", "line37", "comp3"], 1.0, 1.3, 1], "89": [["dnvb", "line38", "comp3"], 1.0, 1.3, 1], "90": [["dnvb", "line39", "comp3"], 1.0, 1.3, 1], "91": [["dnvb", "line41", "comp3"], 1.0, 1.3, 1], "92": [["dnvb", "line44", "comp3"], 1.0, 1.3, 1], "93": [["dnvb", "line45", "comp3"], 1.0, 1.3, 1], "94": [["dnvb", "line46", "comp3"], 1.0, 1.3, 1], "95": [["dnvb", "line47", "comp3"], 1.0, 1.3, 1], "96": [["dnvb", "line48", "comp3"], 1.0, 1.3, 1], "97": [["dnvb", "line49", "comp3"], 1.0, 1.3, 1], "98": [["dnvb", "line43", "comp3"], 1.0, 1.3, 1], "99": [["tanktest", "line16", "comp3"], 1.0, 0.0, 1], "100": [["tanktest", "line17", "comp3"], 1.0, 0.0, 1], "101": [["tanktest", "line18", "comp3"], 1.0, 0.0, 1], "102": [["tanktest", "line19", "comp3"], 1.0, 0.0, 1], "103": [["tanktest", "line20", "comp3"], 1.0, 0.0, 1], "104": [["tanktest", "line23", "comp3"], 1.0, 0.0, 1], "105": [["tanktest", "line24", "comp3"], 1.0, 0.0, 1], "106": [["tanktest", "line25", "comp3"], 1.0, 0.0, 1], "107": [["tanktest", "line26", "comp3"], 1.0, 0.0, 1], "108": [["tanktest", "line27", "comp3"], 1.0, 0.0, 1], "109": [["tanktest", "line28", "comp3"], 1.0, 0.0, 1], "110": [["tanktest", "line29", "comp3"], 1.0, 0.0, 1], "111": [["tanktest", "line30", "comp3"], 1.0, 0.0, 1], "112": [["tanktest", "line34", "comp3"], 1.0, 0.0, 1], "113": [["tanktest", "line35", "comp3"], 1.0, 0.0, 1], "114": [["tanktest", "line36", "comp3"], 1.0, 0.0, 1], "115": [["tanktest", "line37", "comp3"], 1.0, 0.0, 1], "116": [["tanktest", "line38", "comp3"], 1.0, 0.0, 1], "117": [["tanktest", "line39", "comp3"], 1.0, 0.0, 1], "118": [["tanktest", "line41", "comp3"], 1.0, 0.0, 1], "119": [["tanktest", "line44", "comp3"], 1.0, 0.0, 1], "120": [["tanktest", "line45", "comp3"], 1.0, 0.0, 1], "121": [["tanktest", "line46", "comp3"], 1.0, 0.0, 1], "122": [["tanktest", "line47", "comp3"], 1.0, 0.0, 1], "123": [["tanktest", "line48", "comp3"], 1.0, 0.0, 1], "124": [["tanktest", "line49", "comp3"], 1.0, 0.0, 1], "125": [["tanktest", "line43", "comp3"], 1.0, 0.0, 1], "126": [["dnva", "line6", "comp4"], 1.2, 0.7, 1], "127": [["dnva", "line7", "comp4"], 1.2, 0.7, 1], "128": [["dnva", "line8", "comp4"], 1.2, 0.7, 1], "129": [["dnva", "line9", "comp4"], 1.2, 0.7, 1], "130": [["dnva", "line10", "comp4"], 1.2, 0.7, 1], "131": [["dnva", "line11", "comp4"], 1.2, 0.7, 1], "132": [["dnva", "line16", "comp4"], 1.2, 0.7, 1], "133": [["dnva", "line17", "comp4"], 1.2, 0.7, 1], "134": [["dnva", "line18", "comp4"], 1.2, 0.7, 1], "135": [["dnva", "line19", "comp4"], 1.2, 0.7, 1], "136": [["dnva", "line20", "comp4"], 1.2, 0.7, 1], "137": [["dnva", "line21", "comp4"], 1.2, 0.7, 1], "138": [["dnva", "line22", "comp4"], 1.2, 0.7, 1], "139": [["dnva", "line40", "comp4"], 1.2, 0.7, 1], "140": [["dnva", "line12", "comp4"], 1.2, 0.7, 1], "141": [["dnva", "line41", "comp4"], 1.2, 0.7, 1], "142": [["dnva", "line42", "comp4"], 1.2, 0.7, 1], "143": [["dnva", "line44", "comp4"], 1.2, 0.7, 1], "144": [["dnva", "line45", "comp4"], 1.2, 0.7, 1], "145": [["dnva", "line46", "comp4"], 1.2, 0.7, 1], "146": [["dnva", "line47", "comp4"], 1.2, 0.7, 1], "147": [["dnva", "line48", "comp4"], 1.2, 0.7, 1], "148": [["dnva", "line49", "comp4"], 1.2, 0.7, 1], "149": [["dnva", "line50", "comp4"], 1.2, 0.7, 1], "150": [["dnva", "line51", "comp4"], 1.2, 0.7, 1], "151": [["dnva", "line52", "comp4"], 1.2, 0.7, 1], "152": [["dnva", "line53", "comp4"], 1.2, 0.7, 1], "153": [["dnva", "line54", "comp4"], 1.2, 0.7, 1], "154": [["dnva", "line55", "comp4"], 1.2, 0.7, 1], "155": [["dnva", "line56", "comp4"], 1.2, 0.7, 1], "156": [["dnva", "line57", "comp4"], 1.2, 0.7, 1], "157": [["dnva", "line60", "comp4"], 1.2, 0.7, 1], "158": [["dnva", "line61", "comp4"], 1.2, 0.7, 1], "159": [["dnva", "line62", "comp4"], 1.2, 0.7, 1], "160": [["dnva", "line63", "comp4"], 1.2, 0.7, 1], "161": [["dnva", "line64", "comp4"], 1.2, 0.7, 1], "162": [["dnva", "line65", "comp4"], 1.2, 0.7, 1], "163": [["dnva", "line66", "comp4"], 1.2, 0.7, 1], "164": [["dnva", "line67", "comp4"], 1.2, 0.7, 1], "165": [["dnva", "line68", "comp4"], 1.2, 0.7, 1], "166": [["dnva", "line69", "comp4"], 1.2, 0.7, 1], "167": [["dnva", "line70", "comp4"], 1.2, 0.7, 1], "168": [["dnva", "line71", "comp4"], 1.2, 0.7, 1], "169": [["dnva", "line72", "comp4"], 1.2, 0.7, 1], "170": [["dnva", "line73", "comp4"], 1.2, 0.7, 1], "171": [["dnva", "line43", "comp4"], 1.2, 0.7, 1], "172": [["dnvb", "line6", "comp4"], 1.0, 1.3, 1], "173": [["dnvb", "line7", "comp4"], 1.0, 1.3, 1], "174": [["dnvb", "line8", "comp4"], 1.0, 1.3, 1], "175": [["dnvb", "line9", "comp4"], 1.0, 1.3, 1], "176": [["dnvb", "line10", "comp4"], 1.0, 1.3, 1], "177": [["dnvb", "line11", "comp4"], 1.0, 1.3, 1], "178": [["dnvb", "line16", "comp4"], 1.0, 1.3, 1], "179": [["dnvb", "line17", "comp4"], 1.0, 1.3, 1], "180": [["dnvb", "line18", "comp4"], 1.0, 1.3, 1], "181": [["dnvb", "line19", "comp4"], 1.0, 1.3, 1], "182": [["dnvb", "line20", "comp4"], 1.0, 1.3, 1], "183": [["dnvb", "line21", "comp4"], 1.0, 1.3, 1], "184": [["dnvb", "line22", "comp4"], 1.0, 1.3, 1], "185": [["dnvb", "line40", "comp4"], 1.0, 1.3, 1], "186": [["dnvb", "line12", "comp4"], 1.0, 1.3, 1], "187": [["dnvb", "line41", "comp4"], 1.0, 1.3, 1], "188": [["dnvb", "line42", "comp4"], 1.0, 1.3, 1], "189": [["dnvb", "line44", "comp4"], 1.0, 1.3, 1], "190": [["dnvb", "line45", "comp4"], 1.0, 1.3, 1], "191": [["dnvb", "line46", "comp4"], 1.0, 1.3, 1], "192": [["dnvb", "line47", "comp4"], 1.0, 1.3, 1], "193": [["dnvb", "line48", "comp4"], 1.0, 1.3, 1], "194": [["dnvb", "line49", "comp4"], 1.0, 1.3, 1], "195": [["dnvb", "line50", "comp4"], 1.0, 1.3, 1], "196": [["dnvb", "line51", "comp4"], 1.0, 1.3, 1], "197": [["dnvb", "line52", "comp4"], 1.0, 1.3, 1], "198": [["dnvb", "line53", "comp4"], 1.0, 1.3, 1], "199": [["dnvb", "line54", "comp4"], 1.0, 1.3, 1], "200": [["dnvb", "line55", "comp4"], 1.0, 1.3, 1], "201": [["dnvb", "line56", "comp4"], 1.0, 1.3, 1], "202": [["dnvb", "line57", "comp4"], 1.0, 1.3, 1], "203": [["dnvb", "line60", "comp4"], 1.0, 1.3, 1], "204": [["dnvb", "line61", "comp4"], 1.0, 1.3, 1], "205": [["dnvb", "line62", "comp4"], 1.0, 1.3, 1], "206": [["dnvb", "line63", "comp4"], 1.0, 1.3, 1], "207": [["dnvb", "line64", "comp4"], 1.0, 1.3, 1], "208": [["dnvb", "line65", "comp4"], 1.0, 1.3, 1], "209": [["dnvb", "line66", "comp4"], 1.0, 1.3, 1], "210": [["dnvb", "line67", "comp4"], 1.0, 1.3, 1], "211": [["dnvb", "line68", "comp4"], 1.0, 1.3, 1], "212": [["dnvb", "line69", "comp4"], 1.0, 1.3, 1], "213": [["dnvb", "line70", "comp4"], 1.0, 1.3, 1], "214": [["dnvb", "line71", "comp4"], 1.0, 1.3, 1], "215": [["dnvb", "line72", "comp4"], 1.0, 1.3, 1], "216": [["dnvb", "line73", "comp4"], 1.0, 1.3, 1], "217": [["dnvb", "line43", "comp4"], 1.0, 1.3, 1], "218": [["tanktest", "line6", "comp4"], 1.0, 0.0, 1], "219": [["tanktest", "line7", "comp4"], 1.0, 0.0, 1], "220": [["tanktest", "line8", "comp4"], 1.0, 0.0, 1], "221": [["tanktest", "line9", "comp4"], 1.0, 0.0, 1], "222": [["tanktest", "line10", "comp4"], 1.0, 0.0, 1], "223": [["tanktest", "line11", "comp4"], 1.0, 0.0, 1], "224": [["tanktest", "line16", "comp4"], 1.0, 0.0, 1], "225": [["tanktest", "line17", "comp4"], 1.0, 0.0, 1], "226": [["tanktest", "line18", "comp4"], 1.0, 0.0, 1], "227": [["tanktest", "line19", "comp4"], 1.0, 0.0, 1], "228": [["tanktest", "line20", "comp4"], 1.0, 0.0, 1], "229": [["tanktest", "line21", "comp4"], 1.0, 0.0, 1], "230": [["tanktest", "line22", "comp4"], 1.0, 0.0, 1], "231": [["tanktest", "line40", "comp4"], 1.0, 0.0, 1], "232": [["tanktest", "line12", "comp4"], 1.0, 0.0, 1], "233": [["tanktest", "line41", "comp4"], 1.0, 0.0, 1], "234": [["tanktest", "line42", "comp4"], 1.0, 0.0, 1], "235": [["tanktest", "line44", "comp4"], 1.0, 0.0, 1], "236": [["tanktest", "line45", "comp4"], 1.0, 0.0, 1], "237": [["tanktest", "line46", "comp4"], 1.0, 0.0, 1], "238": [["tanktest", "line47", "comp4"], 1.0, 0.0, 1], "239": [["tanktest", "line48", "comp4"], 1.0, 0.0, 1], "240": [["tanktest", "line49", "comp4"], 1.0, 0.0, 1], "241": [["tanktest", "line50", "comp4"], 1.0, 0.0, 1], "242": [["tanktest", "line51", "comp4"], 1.0, 0.0, 1], "243": [["tanktest", "line52", "comp4"], 1.0, 0.0, 1], "244": [["tanktest", "line53", "comp4"], 1.0, 0.0, 1], "245": [["tanktest", "line54", "comp4"], 1.0, 0.0, 1], "246": [["tanktest", "line55", "comp4"], 1.0, 0.0, 1], "247": [["tanktest", "line56", "comp4"], 1.0, 0.0, 1], "248": [["tanktest", "line57", "comp4"], 1.0, 0.0, 1], "249": [["tanktest", "line60", "comp4"], 1.0, 0.0, 1], "250": [["tanktest", "line61", "comp4"], 1.0, 0.0, 1], "251": [["tanktest", "line62", "comp4"], 1.0, 0.0, 1], "252": [["tanktest", "line63", "comp4"], 1.0, 0.0, 1], "253": [["tanktest", "line64", "comp4"], 1.0, 0.0, 1], "254": [["tanktest", "line65", "comp4"], 1.0, 0.0, 1], "255": [["tanktest", "line66", "comp4"], 1.0, 0.0, 1], "256": [["tanktest", "line67", "comp4"], 1.0, 0.0, 1], "257": [["tanktest", "line68", "comp4"], 1.0, 0.0, 1], "258": [["tanktest", "line69", "comp4"], 1.0, 0.0, 1], "259": [["tanktest", "line70", "comp4"], 1.0, 0.0, 1], "260": [["tanktest", "line71", "comp4"], 1.0, 0.0, 1], "261": [["tanktest", "line72", "comp4"], 1.0, 0.0, 1], "262": [["tanktest", "line73", "comp4"], 1.0, 0.0, 1], "263": [["tanktest", "line43", "comp4"], 1.0, 0.0, 1], "264": [["dnva", "line1", "comp5"], 1.2, 0.7, 1], "265": [["dnva", "line3", "comp5"], 1.2, 0.7, 1], "266": [["dnva", "line4", "comp5"], 1.2, 0.7, 1], "267": [["dnva", "line5", "comp5"], 1.2, 0.7, 1], "268": [["dnva", "line13", "comp5"], 1.2, 0.7, 1], "269": [["dnva", "line14", "comp5"], 1.2, 0.7, 1], "270": [["dnva", "line15", "comp5"], 1.2, 0.7, 1], "271": [["dnva", "line58", "comp5"], 1.2, 0.7, 1], "272": [["dnva", "line59", "comp5"], 1.2, 0.7, 1], "273": [["dnva", "line60", "comp5"], 1.2, 0.7, 1], "274": [["dnvb", "line1", "comp5"], 1.0, 1.3, 1], "275": [["dnvb", "line3", "comp5"], 1.0, 1.3, 1], "276": [["dnvb", "line4", "comp5"], 1.0, 1.3, 1], "277": [["dnvb", "line5", "comp5"], 1.0, 1.3, 1], "278": [["dnvb", "line13", "comp5"], 1.0, 1.3, 1], "279": [["dnvb", "line14", "comp5"], 1.0, 1.3, 1], "280": [["dnvb", "line15", "comp5"], 1.0, 1.3, 1], "281": [["dnvb", "line58", "comp5"], 1.0, 1.3, 1], "282": [["dnvb", "line59", "comp5"], 1.0, 1.3, 1], "283": [["dnvb", "line60", "comp5"], 1.0, 1.3, 1], "284": [["tanktest", "line1", "comp5"], 1.0, 0.0, 1], "285": [["tanktest", "line3", "comp5"], 1.0, 0.0, 1], "286": [["tanktest", "line4", "comp5"], 1.0, 0.0, 1], "287": [["tanktest", "line5", "comp5"], 1.0, 0.0, 1], "288": [["tanktest", "line13", "comp5"], 1.0, 0.0, 1], "289": [["tanktest", "line14", "comp5"], 1.0, 0.0, 1], "290": [["tanktest", "line15", "comp5"], 1.0, 0.0, 1], "291": [["tanktest", "line58", "comp5"], 1.0, 0.0, 1], "292": [["tanktest", "line59", "comp5"], 1.0, 0.0, 1], "293": [["tanktest", "line60", "comp5"], 1.0, 0.0, 1], "294": [["manual", "line1", "manual"], 0.0, 1.0, 1], "295": [["manual", "line2", "manual"], 0.0, 1.0, 1], "296": [["manual", "line3", "manual"], 0.0, 1.0, 1], "297": [["manual", "line4", "manual"], 0.0, 1.0, 1], "298": [["manual", "line5", "manual"], 0.0, 1.0, 1], "299": [["manual", "line6", "manual"], 0.0, 1.0, 1], "300": [["manual", "line7", "manual"], 0.0, 1.0, 1], "301": [["manual", "line8", "manual"], 0.0, 1.0, 1], "302": [["manual", "line9", "manual"], 0.0, 1.0, 1], "303": [["manual", "line10", "manual"], 0.0, 1.0, 1], "304": [["manual", "line11", "manual"], 0.0, 1.0, 1], "305": [["manual", "line13", "manual"], 0.0, 1.0, 1], "306": [["manual", "line14", "manual"], 0.0, 1.0, 1], "307": [["manual", "line15", "manual"], 0.0, 1.0, 1], "308": [["manual", "line16", "manual"], 0.0, 1.0, 1], "309": [["manual", "line17", "manual"], 0.0, 1.0, 1], "310": [["manual", "line18", "manual"], 0.0, 1.0, 1], "311": [["manual", "line19", "manual"], 0.0, 1.0, 1], "312": [["manual", "line20", "manual"], 0.0, 1.0, 1], "313": [["manual", "line21", "manual"], 0.0, 1.0, 1], "314": [["manual", "line22", "manual"], 0.0, 1.0, 1], "315": [["manual", "line23", "manual"], 0.0, 1.0, 1], "316": [["manual", "line24", "manual"], 0.0, 1.0, 1], "317": [["manual", "line25", "manual"], 0.0, 1.0, 1], "318": [["manual", "line26", "manual"], 0.0, 1.0, 1], "319": [["manual", "line27", "manual"], 0.0, 1.0, 1], "320": [["manual", "line28", "manual"], 0.0, 1.0, 1], "321": [["manual", "line29", "manual"], 0.0, 1.0, 1], "322": [["manual", "line30", "manual"], 0.0, 1.0, 1], "323": [["manual", "line31", "manual"], 0.0, 1.0, 1], "324": [["manual", "line32", "manual"], 0.0, 1.0, 1], "325": [["manual", "line33", "manual"], 0.0, 1.0, 1], "326": [["manual", "line34", "manual"], 0.0, 1.0, 1], "327": [["manual", "line35", "manual"], 0.0, 1.0, 1], "328": [["manual", "line36", "manual"], 0.0, 1.0, 1], "329": [["manual", "line37", "manual"], 0.0, 1.0, 1], "330": [["manual", "line38", "manual"], 0.0, 1.0, 1], "331": [["manual", "line39", "manual"], 0.0, 1.0, 1], "332": [["manual", "line40", "manual"], 0.0, 1.0, 1], "333": [["manual", "line12", "manual"], 0.0, 1.0, 1], "334": [["manual", "line41", "manual"], 0.0, 1.0, 1], "335": [["manual", "line42", "manual"], 0.0, 1.0, 1], "336": [["manual", "line44", "manual"], 0.0, 1.0, 1], "337": [["manual", "line45", "manual"], 0.0, 1.0, 1], "338": [["manual", "line46", "manual"], 0.0, 1.0, 1], "339": [["manual", "line47", "manual"], 0.0, 1.0, 1], "340": [["manual", "line48", "manual"], 0.0, 1.0, 1], "341": [["manual", "line49", "manual"], 0.0, 1.0, 1], "342": [["manual", "line50", "manual"], 0.0, 1.0, 1], "343": [["manual", "line51", "manual"], 0.0, 1.0, 1], "344": [["manual", "line52", "manual"], 0.0, 1.0, 1], "345": [["manual", "line53", "manual"], 0.0, 1.0, 1], "346": [["manual", "line54", "manual"], 0.0, 1.0, 1], "347": [["manual", "line55", "manual"], 0.0, 1.0, 1], "348": [["manual", "line56", "manual"], 0.0, 1.0, 1], "349": [["manual", "line57", "manual"], 0.0, 1.0, 1], "350": [["manual", "line58", "manual"], 0.0, 1.0, 1], "351": [["manual", "line59", "manual"], 0.0, 1.0, 1], "352": [["manual", "line60", "manual"], 0.0, 1.0, 1], "353": [["manual", "line61", "manual"], 0.0, 1.0, 1], "354": [["manual", "line62", "manual"], 0.0, 1.0, 1], "355": [["manual", "line63", "manual"], 0.0, 1.0, 1], "356": [["manual", "line64", "manual"], 0.0, 1.0, 1], "357": [["manual", "line65", "manual"], 0.0, 1.0, 1], "358": [["manual", "line66", "manual"], 0.0, 1.0, 1], "359": [["manual", "line67", "manual"], 0.0, 1.0, 1], "360": [["manual", "line68", "manual"], 0.0, 1.0, 1], "361": [["manual", "line69", "manual"], 0.0, 1.0, 1], "362": [["manual", "line70", "manual"], 0.0, 1.0, 1], "363": [["manual", "line71", "manual"], 0.0, 1.0, 1], "364": [["manual", "line72", "manual"], 0.0, 1.0, 1], "365": [["manual", "line73", "manual"], 0.0, 1.0, 1], "366": [["manual", "line43", "manual"], 0.0, 1.0, 1], "367": [["dnva", "line50", "ballast_side"], 0.0, 0.7, 1], "368": [["dnvb", "line50", "ballast_side"], 0.0, 1.2, 1], "369": [["tanktest", "line50", "ballast_side"], 0.0, 0.0, 0], "370": [["dnva", "line51", "ballast_side"], 0.0, 0.7, 1], "371": [["dnvb", "line51", "ballast_side"], 0.0, 1.2, 1], "372": [["tanktest", "line51", "ballast_side"], 0.0, 0.0, 0], "373": [["dnva", "line52", "ballast_side"], 0.0, 0.7, 1], "374": [["dnvb", "line52", "ballast_side"], 0.0, 1.2, 1], "375": [["tanktest", "line52", "ballast_side"], 0.0, 0.0, 0], "376": [["dnva", "line53", "ballast_side"], 0.0, 0.7, 1], "377": [["dnvb", "line53", "ballast_side"], 0.0, 1.2, 1], "378": [["tanktest", "line53", "ballast_side"], 0.0, 0.0, 0], "379": [["dnva", "line54", "ballast_side"], 0.0, 0.7, 1], "380": [["dnvb", "line54", "ballast_side"], 0.0, 1.2, 1], "381": [["tanktest", "line54", "ballast_side"], 0.0, 0.0, 0], "382": [["dnva", "line55", "ballast_side"], 0.0, 0.7, 1], "383": [["dnvb", "line55", "ballast_side"], 0.0, 1.2, 1], "384": [["tanktest", "line55", "ballast_side"], 0.0, 0.0, 0], "385": [["dnva", "line3", "ballast_bottom"], 0.0, 0.7, 1], "386": [["dnvb", "line3", "ballast_bottom"], 0.0, 1.2, 1], "387": [["tanktest", "line3", "ballast_bottom"], 0.0, 0.0, 0], "388": [["dnva", "line4", "ballast_bottom"], 0.0, 0.7, 1], "389": [["dnvb", "line4", "ballast_bottom"], 0.0, 1.2, 1], "390": [["tanktest", "line4", "ballast_bottom"], 0.0, 0.0, 0], "391": [["dnva", "line5", "ballast_bottom"], 0.0, 0.7, 1], "392": [["dnvb", "line5", "ballast_bottom"], 0.0, 1.2, 1], "393": [["tanktest", "line5", "ballast_bottom"], 0.0, 0.0, 0], "394": [["dnva", "line6", "ballast_bottom"], 0.0, 0.7, 1], "395": [["dnvb", "line6", "ballast_bottom"], 0.0, 1.2, 1], "396": [["tanktest", "line6", "ballast_bottom"], 0.0, 0.0, 0], "397": [["dnva", "line7", "ballast_bottom"], 0.0, 0.7, 1], "398": [["dnvb", "line7", "ballast_bottom"], 0.0, 1.2, 1], "399": [["tanktest", "line7", "ballast_bottom"], 0.0, 0.0, 0], "400": [["dnva", "line8", "ballast_bottom"], 0.0, 0.7, 1], "401": [["dnvb", "line8", "ballast_bottom"], 0.0, 1.2, 1], "402": [["tanktest", "line8", "ballast_bottom"], 0.0, 0.0, 0], "403": [["dnva", "line9", "ballast_bottom"], 0.0, 0.7, 1], "404": [["dnvb", "line9", "ballast_bottom"], 0.0, 1.2, 1], "405": [["tanktest", "line9", "ballast_bottom"], 0.0, 0.0, 0], "406": [["dnva", "line10", "ballast_bottom"], 0.0, 0.7, 1], "407": [["dnvb", "line10", "ballast_bottom"], 0.0, 1.2, 1], "408": [["tanktest", "line10", "ballast_bottom"], 0.0, 0.0, 0], "409": [["dnva", "line11", "ballast_bottom"], 0.0, 0.7, 1], "410": [["dnvb", "line11", "ballast_bottom"], 0.0, 1.2, 1], "411": [["tanktest", "line11", "ballast_bottom"], 0.0, 0.0, 0], "412": [["dnva", "line12", "ballast_bottom"], 0.0, 0.7, 1], "413": [["dnvb", "line12", "ballast_bottom"], 0.0, 1.2, 1], "414": [["tanktest", "line12", "ballast_bottom"], 0.0, 0.0, 0], "415": [["dnva", "line3", "loaded_static"], 1.3, 0.0, 1], "416": [["dnvb", "line3", "loaded_static"], 1.0, 0.0, 1], "417": [["tanktest", "line3", "loaded_static"], 0.0, 0.0, 0], "418": [["dnva", "line4", "loaded_static"], 1.3, 0.0, 1], "419": [["dnvb", "line4", "loaded_static"], 1.0, 0.0, 1], "420": [["tanktest", "line4", "loaded_static"], 0.0, 0.0, 0], "421": [["dnva", "line5", "loaded_static"], 1.3, 0.0, 1], "422": [["dnvb", "line5", "loaded_static"], 1.0, 0.0, 1], "423": [["tanktest", "line5", "loaded_static"], 0.0, 0.0, 0], "424": [["dnva", "line6", "loaded_static"], 1.3, 0.0, 1], "425": [["dnvb", "line6", "loaded_static"], 1.0, 0.0, 1], "426": [["tanktest", "line6", "loaded_static"], 0.0, 0.0, 0], "427": [["dnva", "line7", "loaded_static"], 1.3, 0.0, 1], "428": [["dnvb", "line7", "loaded_static"], 1.0, 0.0, 1], "429": [["tanktest", "line7", "loaded_static"], 0.0, 0.0, 0], "430": [["dnva", "line8", "loaded_static"], 1.3, 0.0, 1], "431": [["dnvb", "line8", "loaded_static"], 1.0, 0.0, 1], "432": [["tanktest", "line8", "loaded_static"], 0.0, 0.0, 0], "433": [["dnva", "line9", "loaded_static"], 1.3, 0.0, 1], "434": [["dnvb", "line9", "loaded_static"], 1.0, 0.0, 1], "435": [["tanktest", "line9", "loaded_static"], 0.0, 0.0, 0], "436": [["dnva", "line10", "loaded_static"], 1.3, 0.0, 1], "437": [["dnvb", "line10", "loaded_static"], 1.0, 0.0, 1], "438": [["tanktest", "line10", "loaded_static"], 0.0, 0.0, 0], "439": [["dnva", "line11", "loaded_static"], 1.3, 0.0, 1], "440": [["dnvb", "line11", "loaded_static"], 1.0, 0.0, 1], "441": [["tanktest", "line11", "loaded_static"], 0.0, 0.0, 0], "442": [["dnva", "line12", "loaded_static"], 1.3, 0.0, 1], "443": [["dnvb", "line12", "loaded_static"], 1.0, 0.0, 1], "444": [["tanktest", "line12", "loaded_static"], 0.0, 0.0, 0], "445": [["dnva", "line50", "loaded_static"], 1.3, 0.0, 1], "446": [["dnvb", "line50", "loaded_static"], 1.0, 0.0, 1], "447": [["tanktest", "line50", "loaded_static"], 0.0, 0.0, 0], "448": [["dnva", "line51", "loaded_static"], 1.3, 0.0, 1], "449": [["dnvb", "line51", "loaded_static"], 1.0, 0.0, 1], "450": [["tanktest", "line51", "loaded_static"], 0.0, 0.0, 0], "451": [["dnva", "line52", "loaded_static"], 1.3, 0.0, 1], "452": [["dnvb", "line52", "loaded_static"], 1.0, 0.0, 1], "453": [["tanktest", "line52", "loaded_static"], 0.0, 0.0, 0], "454": [["dnva", "line53", "loaded_static"], 1.3, 0.0, 1], "455": [["dnvb", "line53", "loaded_static"], 1.0, 0.0, 1], "456": [["tanktest", "line53", "loaded_static"], 0.0, 0.0, 0], "457": [["dnva", "line54", "loaded_static"], 1.3, 0.0, 1], "458": [["dnvb", "line54", "loaded_static"], 1.0, 0.0, 1], "459": [["tanktest", "line54", "loaded_static"], 0.0, 0.0, 0], "460": [["dnva", "line55", "loaded_static"], 1.3, 0.0, 1], "461": [["dnvb", "line55", "loaded_static"], 1.0, 0.0, 1], "462": [["tanktest", "line55", "loaded_static"], 0.0, 0.0, 0], "463": [["dnva", "line56", "loaded_static"], 1.3, 0.0, 1], "464": [["dnvb", "line56", "loaded_static"], 1.0, 0.0, 1], "465": [["tanktest", "line56", "loaded_static"], 0.0, 0.0, 0], "466": [["dnva", "line57", "loaded_static"], 1.3, 0.0, 1], "467": [["dnvb", "line57", "loaded_static"], 1.0, 0.0, 1], "468": [["tanktest", "line57", "loaded_static"], 0.0, 0.0, 0], "469": [["dnva", "line3", "ballast_static"], 1.3, 0.0, 1], "470": [["dnvb", "line3", "ballast_static"], 1.0, 0.0, 1], "471": [["tanktest", "line3", "ballast_static"], 0.0, 0.0, 0], "472": [["dnva", "line4", "ballast_static"], 1.3, 0.0, 1], "473": [["dnvb", "line4", "ballast_static"], 1.0, 0.0, 1], "474": [["tanktest", "line4", "ballast_static"], 0.0, 0.0, 0], "475": [["dnva", "line5", "ballast_static"], 1.3, 0.0, 1], "476": [["dnvb", "line5", "ballast_static"], 1.0, 0.0, 1], "477": [["tanktest", "line5", "ballast_static"], 0.0, 0.0, 0], "478": [["dnva", "line6", "ballast_static"], 1.3, 0.0, 1], "479": [["dnvb", "line6", "ballast_static"], 1.0, 0.0, 1], "480": [["tanktest", "line6", "ballast_static"], 0.0, 0.0, 0], "481": [["dnva", "line7", "ballast_static"], 1.3, 0.0, 1], "482": [["dnvb", "line7", "ballast_static"], 1.0, 0.0, 1], "483": [["tanktest", "line7", "ballast_static"], 0.0, 0.0, 0], "484": [["dnva", "line8", "ballast_static"], 1.3, 0.0, 1], "485": [["dnvb", "line8", "ballast_static"], 1.0, 0.0, 1], "486": [["tanktest", "line8", "ballast_static"], 0.0, 0.0, 0], "487": [["dnva", "line9", "ballast_static"], 1.3, 0.0, 1], "488": [["dnvb", "line9", "ballast_static"], 1.0, 0.0, 1], "489": [["tanktest", "line9", "ballast_static"], 0.0, 0.0, 0], "490": [["dnva", "line10", "ballast_static"], 1.3, 0.0, 1], "491": [["dnvb", "line10", "ballast_static"], 1.0, 0.0, 1], "492": [["tanktest", "line10", "ballast_static"], 0.0, 0.0, 0], "493": [["dnva", "line11", "ballast_static"], 1.3, 0.0, 1], "494": [["dnvb", "line11", "ballast_static"], 1.0, 0.0, 1], "495": [["tanktest", "line11", "ballast_static"], 0.0, 0.0, 0], "496": [["dnva", "line12", "ballast_static"], 1.3, 0.0, 1], "497": [["dnvb", "line12", "ballast_static"], 1.0, 0.0, 1], "498": [["tanktest", "line12", "ballast_static"], 0.0, 0.0, 0], "499": [["dnva", "line50", "ballast_static"], 1.3, 0.0, 1], "500": [["dnvb", "line50", "ballast_static"], 1.0, 0.0, 1], "501": [["tanktest", "line50", "ballast_static"], 0.0, 0.0, 0], "502": [["dnva", "line51", "ballast_static"], 1.3, 0.0, 1], "503": [["dnvb", "line51", "ballast_static"], 1.0, 0.0, 1], "504": [["tanktest", "line51", "ballast_static"], 0.0, 0.0, 0], "505": [["dnva", "line52", "ballast_static"], 1.3, 0.0, 1], "506": [["dnvb", "line52", "ballast_static"], 1.0, 0.0, 1], "507": [["tanktest", "line52", "ballast_static"], 0.0, 0.0, 0], "508": [["dnva", "line53", "ballast_static"], 1.3, 0.0, 1], "509": [["dnvb", "line53", "ballast_static"], 1.0, 0.0, 1], "510": [["tanktest", "line53", "ballast_static"], 0.0, 0.0, 0], "511": [["dnva", "line54", "ballast_static"], 1.3, 0.0, 1], "512": [["dnvb", "line54", "ballast_static"], 1.0, 0.0, 1], "513": [["tanktest", "line54", "ballast_static"], 0.0, 0.0, 0], "514": [["dnva", "line55", "ballast_static"], 1.3, 0.0, 1], "515": [["dnvb", "line55", "ballast_static"], 1.0, 0.0, 1], "516": [["tanktest", "line55", "ballast_static"], 0.0, 0.0, 0], "517": [["dnva", "line56", "ballast_static"], 1.3, 0.0, 1], "518": [["dnvb", "line56", "ballast_static"], 1.0, 0.0, 1], "519": [["tanktest", "line56", "ballast_static"], 0.0, 0.0, 0], "520": [["dnva", "line57", "ballast_static"], 1.3, 0.0, 1], "521": [["dnvb", "line57", "ballast_static"], 1.0, 0.0, 1], "522": [["tanktest", "line57", "ballast_static"], 0.0, 0.0, 0], "523": [["dnva", "line56", "slamming"], 0.0, 0.7, 1], "524": [["dnvb", "line56", "slamming"], 0.0, 1.2, 1], "525": [["tanktest", "line56", "slamming"], 0.0, 0.0, 0], "526": [["dnva", "line57", "slamming"], 0.0, 0.7, 1], "527": [["dnvb", "line57", "slamming"], 0.0, 1.2, 1], "528": [["tanktest", "line57", "slamming"], 0.0, 0.0, 0], "529": [["dnva", "line3", "loaded_bottom"], 0.0, 0.7, 1], "530": [["dnvb", "line3", "loaded_bottom"], 0.0, 1.2, 1], "531": [["tanktest", "line3", "loaded_bottom"], 0.0, 0.0, 0], "532": [["dnva", "line4", "loaded_bottom"], 0.0, 0.7, 1], "533": [["dnvb", "line4", "loaded_bottom"], 0.0, 1.2, 1], "534": [["tanktest", "line4", "loaded_bottom"], 0.0, 0.0, 0], "535": [["dnva", "line5", "loaded_bottom"], 0.0, 0.7, 1], "536": [["dnvb", "line5", "loaded_bottom"], 0.0, 1.2, 1], "537": [["tanktest", "line5", "loaded_bottom"], 0.0, 0.0, 0], "538": [["dnva", "line6", "loaded_bottom"], 0.0, 0.7, 1], "539": [["dnvb", "line6", "loaded_bottom"], 0.0, 1.2, 1], "540": [["tanktest", "line6", "loaded_bottom"], 0.0, 0.0, 0], "541": [["dnva", "line7", "loaded_bottom"], 0.0, 0.7, 1], "542": [["dnvb", "line7", "loaded_bottom"], 0.0, 1.2, 1], "543": [["tanktest", "line7", "loaded_bottom"], 0.0, 0.0, 0], "544": [["dnva", "line8", "loaded_bottom"], 0.0, 0.7, 1], "545": [["dnvb", "line8", "loaded_bottom"], 0.0, 1.2, 1], "546": [["tanktest", "line8", "loaded_bottom"], 0.0, 0.0, 0], "547": [["dnva", "line9", "loaded_bottom"], 0.0, 0.7, 1], "548": [["dnvb", "line9", "loaded_bottom"], 0.0, 1.2, 1], "549": [["tanktest", "line9", "loaded_bottom"], 0.0, 0.0, 0], "550": [["dnva", "line10", "loaded_bottom"], 0.0, 0.7, 1], "551": [["dnvb", "line10", "loaded_bottom"], 0.0, 1.2, 1], "552": [["tanktest", "line10", "loaded_bottom"], 0.0, 0.0, 0], "553": [["dnva", "line11", "loaded_bottom"], 0.0, 0.7, 1], "554": [["dnvb", "line11", "loaded_bottom"], 0.0, 1.2, 1], "555": [["tanktest", "line11", "loaded_bottom"], 0.0, 0.0, 0], "556": [["dnva", "line12", "loaded_bottom"], 0.0, 0.7, 1], "557": [["dnvb", "line12", "loaded_bottom"], 0.0, 1.2, 1], "558": [["tanktest", "line12", "loaded_bottom"], 0.0, 0.0, 0], "559": [["dnva", "line11", "fls_ballast"], 0.0, 1.0, 1], "560": [["dnvb", "line11", "fls_ballast"], 0.0, 1.0, 1], "561": [["tanktest", "line11", "fls_ballast"], 0.0, 0.0, 0], "562": [["dnva", "line10", "fls_ballast"], 0.0, 1.0, 1], "563": [["dnvb", "line10", "fls_ballast"], 0.0, 1.0, 1], "564": [["tanktest", "line10", "fls_ballast"], 0.0, 0.0, 0], "565": [["dnva", "line9", "fls_ballast"], 0.0, 1.0, 1], "566": [["dnvb", "line9", "fls_ballast"], 0.0, 1.0, 1], "567": [["tanktest", "line9", "fls_ballast"], 0.0, 0.0, 0], "568": [["dnva", "line8", "fls_ballast"], 0.0, 1.0, 1], "569": [["dnvb", "line8", "fls_ballast"], 0.0, 1.0, 1], "570": [["tanktest", "line8", "fls_ballast"], 0.0, 0.0, 0], "571": [["dnva", "line12", "fls_ballast"], 0.0, 1.0, 1], "572": [["dnvb", "line12", "fls_ballast"], 0.0, 1.0, 1], "573": [["tanktest", "line12", "fls_ballast"], 0.0, 0.0, 0], "574": [["dnva", "line50", "fls_ballast"], 0.0, 1.0, 1], "575": [["dnvb", "line50", "fls_ballast"], 0.0, 1.0, 1], "576": [["tanktest", "line50", "fls_ballast"], 0.0, 0.0, 0], "577": [["dnva", "line3", "loaded_bottom_FLS"], 0.0, 1.0, 1], "578": [["dnvb", "line3", "loaded_bottom_FLS"], 0.0, 1.0, 1], "579": [["tanktest", "line3", "loaded_bottom_FLS"], 0.0, 0.0, 0], "580": [["dnva", "line4", "loaded_bottom_FLS"], 0.0, 1.0, 1], "581": [["dnvb", "line4", "loaded_bottom_FLS"], 0.0, 1.0, 1], "582": [["tanktest", "line4", "loaded_bottom_FLS"], 0.0, 0.0, 0], "583": [["dnva", "line5", "loaded_bottom_FLS"], 0.0, 1.0, 1], "584": [["dnvb", "line5", "loaded_bottom_FLS"], 0.0, 1.0, 1], "585": [["tanktest", "line5", "loaded_bottom_FLS"], 0.0, 0.0, 0], "586": [["dnva", "line6", "loaded_bottom_FLS"], 0.0, 1.0, 1], "587": [["dnvb", "line6", "loaded_bottom_FLS"], 0.0, 1.0, 1], "588": [["tanktest", "line6", "loaded_bottom_FLS"], 0.0, 0.0, 0], "589": [["dnva", "line7", "loaded_bottom_FLS"], 0.0, 1.0, 1], "590": [["dnvb", "line7", "loaded_bottom_FLS"], 0.0, 1.0, 1], "591": [["tanktest", "line7", "loaded_bottom_FLS"], 0.0, 0.0, 0], "592": [["dnva", "line8", "loaded_bottom_FLS"], 0.0, 1.0, 1], "593": [["dnvb", "line8", "loaded_bottom_FLS"], 0.0, 1.0, 1], "594": [["tanktest", "line8", "loaded_bottom_FLS"], 0.0, 0.0, 0], "595": [["dnva", "line9", "loaded_bottom_FLS"], 0.0, 1.0, 1], "596": [["dnvb", "line9", "loaded_bottom_FLS"], 0.0, 1.0, 1], "597": [["tanktest", "line9", "loaded_bottom_FLS"], 0.0, 0.0, 0], "598": [["dnva", "line10", "loaded_bottom_FLS"], 0.0, 1.0, 1], "599": [["dnvb", "line10", "loaded_bottom_FLS"], 0.0, 1.0, 1], "600": [["tanktest", "line10", "loaded_bottom_FLS"], 0.0, 0.0, 0], "601": [["dnva", "line11", "loaded_bottom_FLS"], 0.0, 1.0, 1], "602": [["dnvb", "line11", "loaded_bottom_FLS"], 0.0, 1.0, 1], "603": [["tanktest", "line11", "loaded_bottom_FLS"], 0.0, 0.0, 0], "604": [["dnva", "line12", "loaded_bottom_FLS"], 0.0, 1.0, 1], "605": [["dnvb", "line12", "loaded_bottom_FLS"], 0.0, 1.0, 1], "606": [["tanktest", "line12", "loaded_bottom_FLS"], 0.0, 0.0, 0], "607": [["dnva", "line3", "ballast_bottom_FLS"], 0.0, 1.0, 1], "608": [["dnvb", "line3", "ballast_bottom_FLS"], 0.0, 1.0, 1], "609": [["tanktest", "line3", "ballast_bottom_FLS"], 0.0, 0.0, 0], "610": [["dnva", "line4", "ballast_bottom_FLS"], 0.0, 1.0, 1], "611": [["dnvb", "line4", "ballast_bottom_FLS"], 0.0, 1.0, 1], "612": [["tanktest", "line4", "ballast_bottom_FLS"], 0.0, 0.0, 0], "613": [["dnva", "line5", "ballast_bottom_FLS"], 0.0, 1.0, 1], "614": [["dnvb", "line5", "ballast_bottom_FLS"], 0.0, 1.0, 1], "615": [["tanktest", "line5", "ballast_bottom_FLS"], 0.0, 0.0, 0], "616": [["dnva", "line6", "ballast_bottom_FLS"], 0.0, 1.0, 1], "617": [["dnvb", "line6", "ballast_bottom_FLS"], 0.0, 1.0, 1], "618": [["tanktest", "line6", "ballast_bottom_FLS"], 0.0, 0.0, 0], "619": [["dnva", "line7", "ballast_bottom_FLS"], 0.0, 1.0, 1], "620": [["dnvb", "line7", "ballast_bottom_FLS"], 0.0, 1.0, 1], "621": [["tanktest", "line7", "ballast_bottom_FLS"], 0.0, 0.0, 0], "622": [["dnva", "line8", "ballast_bottom_FLS"], 0.0, 1.0, 1], "623": [["dnvb", "line8", "ballast_bottom_FLS"], 0.0, 1.0, 1], "624": [["tanktest", "line8", "ballast_bottom_FLS"], 0.0, 0.0, 0], "625": [["dnva", "line9", "ballast_bottom_FLS"], 0.0, 1.0, 1], "626": [["dnvb", "line9", "ballast_bottom_FLS"], 0.0, 1.0, 1], "627": [["tanktest", "line9", "ballast_bottom_FLS"], 0.0, 0.0, 0], "628": [["dnva", "line10", "ballast_bottom_FLS"], 0.0, 1.0, 1], "629": [["dnvb", "line10", "ballast_bottom_FLS"], 0.0, 1.0, 1], "630": [["tanktest", "line10", "ballast_bottom_FLS"], 0.0, 0.0, 0], "631": [["dnva", "line11", "ballast_bottom_FLS"], 0.0, 1.0, 1], "632": [["dnvb", "line11", "ballast_bottom_FLS"], 0.0, 1.0, 1], "633": [["tanktest", "line11", "ballast_bottom_FLS"], 0.0, 0.0, 0], "634": [["dnva", "line12", "ballast_bottom_FLS"], 0.0, 1.0, 1], "635": [["dnvb", "line12", "ballast_bottom_FLS"], 0.0, 1.0, 1], "636": [["tanktest", "line12", "ballast_bottom_FLS"], 0.0, 0.0, 0], "637": [["dnva", "line1", "comp4"], 1.2, 0.7, 1], "638": [["dnva", "line3", "comp4"], 1.2, 0.7, 1], "639": [["dnva", "line4", "comp4"], 1.2, 0.7, 1], "640": [["dnva", "line5", "comp4"], 1.2, 0.7, 1], "641": [["dnva", "line13", "comp4"], 1.2, 0.7, 1], "642": [["dnva", "line14", "comp4"], 1.2, 0.7, 1], "643": [["dnva", "line15", "comp4"], 1.2, 0.7, 1], "644": [["dnva", "line58", "comp4"], 1.2, 0.7, 1], "645": [["dnva", "line59", "comp4"], 1.2, 0.7, 1], "646": [["dnvb", "line1", "comp4"], 1.0, 1.3, 1], "647": [["dnvb", "line3", "comp4"], 1.0, 1.3, 1], "648": [["dnvb", "line4", "comp4"], 1.0, 1.3, 1], "649": [["dnvb", "line5", "comp4"], 1.0, 1.3, 1], "650": [["dnvb", "line13", "comp4"], 1.0, 1.3, 1], "651": [["dnvb", "line14", "comp4"], 1.0, 1.3, 1], "652": [["dnvb", "line15", "comp4"], 1.0, 1.3, 1], "653": [["dnvb", "line58", "comp4"], 1.0, 1.3, 1], "654": [["dnvb", "line59", "comp4"], 1.0, 1.3, 1], "655": [["tanktest", "line1", "comp4"], 1.0, 0.0, 1], "656": [["tanktest", "line3", "comp4"], 1.0, 0.0, 1], "657": [["tanktest", "line4", "comp4"], 1.0, 0.0, 1], "658": [["tanktest", "line5", "comp4"], 1.0, 0.0, 1], "659": [["tanktest", "line13", "comp4"], 1.0, 0.0, 1], "660": [["tanktest", "line14", "comp4"], 1.0, 0.0, 1], "661": [["tanktest", "line15", "comp4"], 1.0, 0.0, 1], "662": [["tanktest", "line58", "comp4"], 1.0, 0.0, 1], "663": [["tanktest", "line59", "comp4"], 1.0, 0.0, 1], "664": [["dnva", "line3", "TankTest"], 0.0, 0.0, 0], "665": [["dnvb", "line3", "TankTest"], 0.0, 0.0, 0], "666": [["tanktest", "line3", "TankTest"], 1.0, 0.0, 1], "667": [["dnva", "line4", "TankTest"], 0.0, 0.0, 0], "668": [["dnvb", "line4", "TankTest"], 0.0, 0.0, 0], "669": [["tanktest", "line4", "TankTest"], 1.0, 0.0, 1], "670": [["dnva", "line5", "TankTest"], 0.0, 0.0, 0], "671": [["dnvb", "line5", "TankTest"], 0.0, 0.0, 0], "672": [["tanktest", "line5", "TankTest"], 1.0, 0.0, 1], "673": [["dnva", "line6", "TankTest"], 0.0, 0.0, 0], "674": [["dnvb", "line6", "TankTest"], 0.0, 0.0, 0], "675": [["tanktest", "line6", "TankTest"], 1.0, 0.0, 1], "676": [["dnva", "line7", "TankTest"], 0.0, 0.0, 0], "677": [["dnvb", "line7", "TankTest"], 0.0, 0.0, 0], "678": [["tanktest", "line7", "TankTest"], 1.0, 0.0, 1], "679": [["dnva", "line8", "TankTest"], 0.0, 0.0, 0], "680": [["dnvb", "line8", "TankTest"], 0.0, 0.0, 0], "681": [["tanktest", "line8", "TankTest"], 1.0, 0.0, 1], "682": [["dnva", "line9", "TankTest"], 0.0, 0.0, 0], "683": [["dnvb", "line9", "TankTest"], 0.0, 0.0, 0], "684": [["tanktest", "line9", "TankTest"], 1.0, 0.0, 1], "685": [["dnva", "line10", "TankTest"], 0.0, 0.0, 0], "686": [["dnvb", "line10", "TankTest"], 0.0, 0.0, 0], "687": [["tanktest", "line10", "TankTest"], 1.0, 0.0, 1], "688": [["dnva", "line11", "TankTest"], 0.0, 0.0, 0], "689": [["dnvb", "line11", "TankTest"], 0.0, 0.0, 0], "690": [["tanktest", "line11", "TankTest"], 1.0, 0.0, 1], "691": [["dnva", "line12", "TankTest"], 0.0, 0.0, 0], "692": [["dnvb", "line12", "TankTest"], 0.0, 0.0, 0], "693": [["tanktest", "line12", "TankTest"], 1.0, 0.0, 1], "694": [["dnva", "line50", "TankTest"], 0.0, 0.0, 0], "695": [["dnvb", "line50", "TankTest"], 0.0, 0.0, 0], "696": [["tanktest", "line50", "TankTest"], 1.0, 0.0, 1], "697": [["dnva", "line51", "TankTest"], 0.0, 0.0, 0], "698": [["dnvb", "line51", "TankTest"], 0.0, 0.0, 0], "699": [["tanktest", "line51", "TankTest"], 1.0, 0.0, 1], "700": [["dnva", "line74", "comp3"], 1.2, 0.7, 1], "701": [["dnvb", "line74", "comp3"], 1.0, 1.2, 1], "702": [["tanktest", "line74", "comp3"], 1.0, 0.0, 1], "703": [["manual", "line74", "manual"], 0.0, 0.0, 0], "704": [["dnva", "line75", "comp3"], 1.2, 0.7, 1], "705": [["dnvb", "line75", "comp3"], 1.0, 1.2, 1], "706": [["tanktest", "line75", "comp3"], 1.0, 0.0, 1], "707": [["manual", "line75", "manual"], 0.0, 0.0, 0], "708": [["dnva", "line76", "comp3"], 1.2, 0.7, 1], "709": [["dnvb", "line76", "comp3"], 1.0, 1.2, 1], "710": [["tanktest", "line76", "comp3"], 1.0, 0.0, 1], "711": [["manual", "line76", "manual"], 0.0, 0.0, 0], "712": [["dnva", "line77", "comp3"], 1.2, 0.7, 1], "713": [["dnvb", "line77", "comp3"], 1.0, 1.2, 1], "714": [["tanktest", "line77", "comp3"], 1.0, 0.0, 1], "715": [["manual", "line77", "manual"], 0.0, 0.0, 0], "716": [["dnva", "line78", "comp3"], 1.2, 0.7, 1], "717": [["dnvb", "line78", "comp3"], 1.0, 1.2, 1], "718": [["tanktest", "line78", "comp3"], 1.0, 0.0, 1], "719": [["manual", "line78", "manual"], 0.0, 0.0, 0], "720": [["dnva", "line79", "comp3"], 1.2, 0.7, 1], "721": [["dnvb", "line79", "comp3"], 1.0, 1.2, 1], "722": [["tanktest", "line79", "comp3"], 1.0, 0.0, 1], "723": [["manual", "line79", "manual"], 0.0, 0.0, 0], "724": [["dnva", "line80", "comp3"], 1.2, 0.7, 1], "725": [["dnvb", "line80", "comp3"], 1.0, 1.2, 1], "726": [["tanktest", "line80", "comp3"], 1.0, 0.0, 1], "727": [["manual", "line80", "manual"], 0.0, 0.0, 0]}, "tank_properties": {"grid": [[[[1.0, 951]], 361], [[[-1.0, 372], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 223], [-1.0, 1], [4.0, 29], [-1.0, 1], [1.0, 579]], 254], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 222], [-1.0, 1], [4.0, 30], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 220], [-1.0, 2], [4.0, 31], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 219], [-1.0, 1], [4.0, 33], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 218], [-1.0, 1], [4.0, 34], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 216], [-1.0, 2], [4.0, 35], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 215], [-1.0, 1], [4.0, 37], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 214], [-1.0, 1], [4.0, 38], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 212], [-1.0, 2], [4.0, 39], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 211], [-1.0, 1], [4.0, 41], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 210], [-1.0, 1], [4.0, 42], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 208], [-1.0, 2], [4.0, 43], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 207], [-1.0, 1], [4.0, 45], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 206], [-1.0, 1], [4.0, 46], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 204], [-1.0, 2], [4.0, 47], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 203], [-1.0, 1], [4.0, 49], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 202], [-1.0, 1], [4.0, 50], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 200], [-1.0, 2], [4.0, 51], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 199], [-1.0, 1], [4.0, 53], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 198], [-1.0, 1], [4.0, 54], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 196], [-1.0, 2], [4.0, 55], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 195], [-1.0, 1], [4.0, 57], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 194], [-1.0, 1], [4.0, 58], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 192], [-1.0, 2], [4.0, 59], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 191], [-1.0, 1], [4.0, 61], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 190], [-1.0, 1], [4.0, 62], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 188], [-1.0, 2], [4.0, 63], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 187], [-1.0, 1], [4.0, 65], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 186], [-1.0, 1], [4.0, 66], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [2.0, 116], [-1.0, 1], [3.0, 184], [-1.0, 2], [4.0, 67], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 302], [4.0, 69], [-1.0, 1], [1.0, 579]], 1], [[[-1.0, 1], [4.0, 369], [-1.0, 1], [1.0, 580]], 1], [[[-1.0, 1], [4.0, 368], [-1.0, 1], [1.0, 581]], 1], [[[-1.0, 1], [4.0, 366], [-1.0, 2], [1.0, 582]], 1], [[[-1.0, 1], [4.0, 365], [-1.0, 1], [1.0, 584]], 1], [[[-1.0, 1], [4.0, 364], [-1.0, 1], [1.0, 585]], 1], [[[-1.0, 1], [4.0, 363], [-1.0, 1], [1.0, 586]], 1], [[[-1.0, 1], [4.0, 362], [-1.0, 1], [1.0, 587]], 1], [[[-1.0, 1], [4.0, 360], [-1.0, 2], [1.0, 588]], 1], [[[-1.0, 1], [4.0, 359], [-1.0, 1], [1.0, 590]], 1], [[[-1.0, 1], [4.0, 358], [-1.0, 1], [1.0, 591]], 1], [[[-1.0, 1], [4.0, 357], [-1.0, 1], [1.0, 592]], 1], [[[-1.0, 1], [4.0, 356], [-1.0, 1], [1.0, 593]], 1], [[[-1.0, 1], [4.0, 354], [-1.0, 2], [1.0, 594]], 1], [[[-1.0, 1], [4.0, 353], [-1.0, 1], [1.0, 596]], 1], [[[-1.0, 1], [4.0, 352], [-1.0, 1], [1.0, 597]], 1], [[[-1.0, 1], [4.0, 351], [-1.0, 1], [1.0, 598]], 1], [[[-1.0, 1], [4.0, 350], [-1.0, 1], [1.0, 599]], 1], [[[-1.0, 1], [4.0, 348], [-1.0, 2], [1.0, 600]], 1], [[[-1.0, 1], [4.0, 347], [-1.0, 1], [1.0, 602]], 1], [[[-1.0, 1], [4.0, 346], [-1.0, 1], [1.0, 603]], 1], [[[-1.0, 1], [4.0, 345], [-1.0, 1], [1.0, 604]], 1], [[[-1.0, 1], [4.0, 344], [-1.0, 1], [1.0, 605]], 1], [[[-1.0, 1], [4.0, 342], [-1.0, 2], [1.0, 606]], 1], [[[-1.0, 1], [4.0, 341], [-1.0, 1], [1.0, 608]], 1], [[[-1.0, 342], [1.0, 609]], 1]], "search_data": {"1": 523593, "2": 33284, "3": 63107, "4": 18140}, "comp2": {"comp_no": 2, "cells": 32829, "min_el": 2.5, "max_el": 30.9, "content": "crude_oil", "added_press": 25000.0, "acc": {"static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "density": 900.0, "all_types": ["BOTTOM", "BBS", "BBT", "HOPPER", "SIDE_SHELL", "INNER_SIDE", "FRAME", "FRAME_WT", "SSS", "MD", "GENERAL_INTERNAL_WT", "GENERAL_INTERNAL_NONWT", "INTERNAL_1_MPA", "INTERNAL_LOW_STRESS_WT"], "static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "comp3": {"comp_no": 3, "cells": 62530, "min_el": 2.5, "max_el": 30.900000000000002, "content": "crude_oil", "added_press": 25000.0, "acc": {"static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "density": 900.0, "all_types": ["BOTTOM", "BBS", "BBT", "HOPPER", "SIDE_SHELL", "INNER_SIDE", "FRAME", "FRAME_WT", "SSS", "MD", "GENERAL_INTERNAL_WT", "GENERAL_INTERNAL_NONWT", "INTERNAL_1_MPA", "INTERNAL_LOW_STRESS_WT"], "static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "comp4": {"comp_no": 4, "cells": 17367, "min_el": 0.0, "max_el": 30.900000000000002, "content": "ballast", "added_press": 25000.0, "acc": {"static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}, "density": 1025.0, "all_types": ["BOTTOM", "BBS", "BBT", "HOPPER", "SIDE_SHELL", "INNER_SIDE", "FRAME", "FRAME_WT", "SSS", "MD", "GENERAL_INTERNAL_WT", "GENERAL_INTERNAL_NONWT", "INTERNAL_1_MPA", "INTERNAL_LOW_STRESS_WT"], "static": 9.81, "dyn_loaded": 3.0, "dyn_ballast": 3.0}}, "fatigue_properties": {"line3": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line4": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line5": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line6": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line7": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line8": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.8, 0.8, 0.0], "Period": [8.0, 8.0, 0.0], "Fraction": [0.5, 0.5, 0.0], "CorrLoc": [0.5, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.5, 0.5, 0.0], "DFF": 2.0}, "line9": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 10000.0, "Weibull": [0.0, 0.8, 0.0], "Period": [0.0, 8.0, 0.0], "Fraction": [0.0, 1.0, 0.0], "CorrLoc": [0.0, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.0, 0.5, 0.0], "DFF": 2.0}, "line10": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.0, 0.8, 0.0], "Period": [0.0, 8.0, 0.0], "Fraction": [0.0, 1.0, 0.0], "CorrLoc": [0.0, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.0, 0.5, 0.0], "DFF": 2.0}, "line11": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.0, 0.8, 0.0], "Period": [0.0, 8.0, 0.0], "Fraction": [0.0, 1.0, 0.0], "CorrLoc": [0.0, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.0, 0.5, 0.0], "DFF": 2.0}, "line12": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.0, 0.8, 0.0], "Period": [0.0, 8.0, 0.0], "Fraction": [0.0, 1.0, 0.0], "CorrLoc": [0.0, 0.5, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.0, 0.5, 0.0], "DFF": 2.0}, "line50": {"SN-curve": "Ec", "SCF": 1.0, "Design life": 20.0, "n0": 210240000.0, "Weibull": [0.0, 0.0, 0.0], "Period": [0.0, 0.0, 0.0], "Fraction": [0.0, 0.0, 0.0], "CorrLoc": [0.0, 0.0, 0.0], "Order": ["Loaded", "Ballast", "Part"], "Accelerations": [0.0, 0.0, 0.0], "DFF": 2.0}, "line51": null, "line52": null, "line53": null, "line54": null, "line55": null, "line56": null, "line57": null, "line31": null, "line32": null, "line33": null, "line34": null, "line35": null, "line36": null, "line37": null, "line38": null, "line39": null, "line40": null, "line13": null, "line14": null, "line15": null, "line16": null, "line17": null, "line18": null, "line19": null, "line20": null, "line41": null, "line43": null, "line44": null, "line45": null, "line46": null, "line47": null, "line48": null, "line49": null, "line58": null, "line59": null, "line61": null, "line62": null, "line63": null, "line64": null, "line65": null, "line66": null, "line21": null, "line42": null, "line22": null, "line67": null, "line68": null, "line69": null, "line70": null, "line71": null, "line72": null, "line73": null, "line60": null, "line1": null, "line2": null, "line23": null, "line24": null, "line25": null, "line26": null, "line27": null, "line28": null, "line29": null, "line30": null, "line80": null, "line79": null, "line78": null, "line77": null, "line76": null, "line75": null, "line74": null}, "PULS results": {"line3": {"Identification": "line3", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [102.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.41261, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [309.0, "MPa"], "Trans. Stress": [304.0, "MPa"], "Trans. stress": [304.0, "MPa"], "Shear stress": [15.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [144.0, "MPa"], "Trans. Stress": [141.0, "MPa"], "Trans. stress": [141.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.69, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [28.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.71, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line4": {"Identification": "line4", "Plate geometry": {"Length of panel": [3900.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [250.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.9, "mm"], "Stiffener tilt": [3.9, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [101.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.406561, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [312.0, "MPa"], "Trans. Stress": [311.0, "MPa"], "Trans. stress": [311.0, "MPa"], "Shear stress": [16.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [147.0, "MPa"], "Trans. Stress": [146.0, "MPa"], "Trans. stress": [146.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.67, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.69, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line5": {"Identification": "line5", "Plate geometry": {"Length of panel": [3800.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [250.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.8000000000000003, "mm"], "Stiffener tilt": [3.8000000000000003, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [103.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.406575, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [328.0, "MPa"], "Trans. Stress": [319.0, "MPa"], "Trans. stress": [319.0, "MPa"], "Shear stress": [16.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [133.0, "MPa"], "Trans. Stress": [130.0, "MPa"], "Trans. stress": [130.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.74, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.77, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line6": {"Identification": "line6", "Plate geometry": {"Length of panel": [3700.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [250.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.7, "mm"], "Stiffener tilt": [3.7, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [103.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.412197, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [346.0, "MPa"], "Trans. Stress": [337.0, "MPa"], "Trans. stress": [337.0, "MPa"], "Shear stress": [17.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [134.0, "MPa"], "Trans. Stress": [131.0, "MPa"], "Trans. stress": [131.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.73, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [35.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.76, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line7": {"Identification": "line7", "Plate geometry": {"Length of panel": [3600.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [250.0, "mm"], "Flange thick.": [12.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.6, "mm"], "Stiffener tilt": [3.6, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [102.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.422985, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [348.0, "MPa"], "Trans. Stress": [342.0, "MPa"], "Trans. stress": [342.0, "MPa"], "Shear stress": [17.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [133.0, "MPa"], "Trans. Stress": [131.0, "MPa"], "Trans. stress": [131.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.73, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [35.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.76, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Not ok", null], "stiffness": ["Ok", null]}}, "line8": {"Identification": "line8", "Plate geometry": {"Length of panel": [3500.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [250.0, "mm"], "Flange thick.": [12.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.5, "mm"], "Stiffener tilt": [3.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [102.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.438508, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [367.0, "MPa"], "Trans. Stress": [362.0, "MPa"], "Trans. stress": [362.0, "MPa"], "Shear stress": [18.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [134.0, "MPa"], "Trans. Stress": [132.0, "MPa"], "Trans. stress": [132.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.73, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [37.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.76, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Not ok", null], "stiffness": ["Ok", null]}}, "line9": {"Identification": "line9", "Plate geometry": {"Length of panel": [3800.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.8000000000000003, "mm"], "Stiffener tilt": [3.8000000000000003, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [101.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.459639, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [331.0, "MPa"], "Trans. Stress": [329.0, "MPa"], "Trans. stress": [329.0, "MPa"], "Shear stress": [16.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [144.0, "MPa"], "Trans. Stress": [143.0, "MPa"], "Trans. stress": [143.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.69, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [29.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.7, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line50": {"Identification": "line50", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.300313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [182.0, "MPa"], "Trans. Stress": [456.0, "MPa"], "Trans. stress": [456.0, "MPa"], "Shear stress": [14.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [57.0, "MPa"], "Trans. Stress": [143.0, "MPa"], "Trans. stress": [143.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.65, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [43.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [27.0, "%"], "Web stiffener buckling": [27.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.7, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line51": {"Identification": "line51", "Plate geometry": {"Length of panel": [3199.999999999999, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.1999999999999993, "mm"], "Stiffener tilt": [3.1999999999999993, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.295486, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [160.0, "MPa"], "Trans. Stress": [401.0, "MPa"], "Trans. stress": [401.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [56.0, "MPa"], "Trans. Stress": [139.0, "MPa"], "Trans. stress": [139.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.67, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [40.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [29.0, "%"], "Web stiffener buckling": [29.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.72, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line52": {"Identification": "line52", "Plate geometry": {"Length of panel": [3400.0000000000005, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4000000000000004, "mm"], "Stiffener tilt": [3.4000000000000004, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.248226, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [142.0, "MPa"], "Trans. Stress": [355.0, "MPa"], "Trans. stress": [355.0, "MPa"], "Shear stress": [11.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [54.0, "MPa"], "Trans. Stress": [136.0, "MPa"], "Trans. stress": [136.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.67, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [37.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.74, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line53": {"Identification": "line53", "Plate geometry": {"Length of panel": [3400.0000000000005, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [200.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4000000000000004, "mm"], "Stiffener tilt": [3.4000000000000004, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.214038, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [142.0, "MPa"], "Trans. Stress": [355.0, "MPa"], "Trans. stress": [355.0, "MPa"], "Shear stress": [11.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [54.0, "MPa"], "Trans. Stress": [136.0, "MPa"], "Trans. stress": [136.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.67, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [37.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.74, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line54": {"Identification": "line54", "Plate geometry": {"Length of panel": [3600.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.6, "mm"], "Stiffener tilt": [3.6, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.196177, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [110.0, "MPa"], "Trans. Stress": [275.0, "MPa"], "Trans. stress": [275.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [50.0, "MPa"], "Trans. Stress": [125.0, "MPa"], "Trans. stress": [125.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.71, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [28.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.8, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line55": {"Identification": "line55", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.189068, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [99.0, "MPa"], "Trans. Stress": [248.0, "MPa"], "Trans. stress": [248.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [49.0, "MPa"], "Trans. Stress": [123.0, "MPa"], "Trans. stress": [123.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.72, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [28.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.81, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line56": {"Identification": "line56", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.105442, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [89.0, "MPa"], "Trans. Stress": [223.0, "MPa"], "Trans. stress": [223.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [49.0, "MPa"], "Trans. Stress": [121.0, "MPa"], "Trans. stress": [121.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.71, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [26.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [35.0, "%"], "Web stiffener buckling": [35.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.82, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line57": {"Identification": "line57", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [340.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.155554, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [89.0, "MPa"], "Trans. Stress": [223.0, "MPa"], "Trans. stress": [223.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [49.0, "MPa"], "Trans. Stress": [121.0, "MPa"], "Trans. stress": [121.0, "MPa"], "Shear stress": [4.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.73, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [27.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.82, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line31": {"Identification": "line31", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [90.0, "MPa"], "Trans. Stress": [158.0, "MPa"], "Trans. stress": [158.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [77.0, "MPa"], "Trans. Stress": [134.0, "MPa"], "Trans. stress": [134.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [23.0, "%"], "Global stiffener buckling": [25.0, "%"], "Torsional stiffener buckling": [26.0, "%"], "Web stiffener buckling": [26.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line32": {"Identification": "line32", "Plate geometry": {"Length of panel": [3900.0000000000005, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.9000000000000004, "mm"], "Stiffener tilt": [3.9000000000000004, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [95.0, "MPa"], "Trans. Stress": [166.0, "MPa"], "Trans. stress": [166.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [77.0, "MPa"], "Trans. Stress": [135.0, "MPa"], "Trans. stress": [135.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [24.0, "%"], "Global stiffener buckling": [21.0, "%"], "Torsional stiffener buckling": [27.0, "%"], "Web stiffener buckling": [27.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line33": {"Identification": "line33", "Plate geometry": {"Length of panel": [3799.999999999999, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.7999999999999994, "mm"], "Stiffener tilt": [3.7999999999999994, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [100.0, "MPa"], "Trans. Stress": [174.0, "MPa"], "Trans. stress": [174.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [78.0, "MPa"], "Trans. Stress": [136.0, "MPa"], "Trans. stress": [136.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [26.0, "%"], "Global stiffener buckling": [16.0, "%"], "Torsional stiffener buckling": [29.0, "%"], "Web stiffener buckling": [29.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line37": {"Identification": "line37", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [100.0, "MPa"], "Trans. Stress": [174.0, "MPa"], "Trans. stress": [174.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [78.0, "MPa"], "Trans. Stress": [136.0, "MPa"], "Trans. stress": [136.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [26.0, "%"], "Global stiffener buckling": [16.0, "%"], "Torsional stiffener buckling": [29.0, "%"], "Web stiffener buckling": [29.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line38": {"Identification": "line38", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [100.0, "MPa"], "Trans. Stress": [174.0, "MPa"], "Trans. stress": [174.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [78.0, "MPa"], "Trans. Stress": [136.0, "MPa"], "Trans. stress": [136.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [26.0, "%"], "Global stiffener buckling": [16.0, "%"], "Torsional stiffener buckling": [29.0, "%"], "Web stiffener buckling": [29.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line39": {"Identification": "line39", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [90.0, "MPa"], "Trans. Stress": [158.0, "MPa"], "Trans. stress": [158.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [77.0, "MPa"], "Trans. Stress": [134.0, "MPa"], "Trans. stress": [134.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [23.0, "%"], "Global stiffener buckling": [25.0, "%"], "Torsional stiffener buckling": [26.0, "%"], "Web stiffener buckling": [26.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.52, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line40": {"Identification": "line40", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [160.0, "MPa"], "Trans. Stress": [280.0, "MPa"], "Trans. stress": [280.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [82.0, "MPa"], "Trans. Stress": [144.0, "MPa"], "Trans. stress": [144.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.41, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.49, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line13": {"Identification": "line13", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [20.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [450.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [150.0, "MPa"], "Trans. Stress": [338.0, "MPa"], "Trans. stress": [338.0, "MPa"], "Shear stress": [19.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [63.0, "MPa"], "Trans. Stress": [141.0, "MPa"], "Trans. stress": [141.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.62, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [27.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.64, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line16": {"Identification": "line16", "Plate geometry": {"Length of panel": [3699.999999999999, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [375.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [3.6999999999999993, "mm"], "Stiffener tilt": [3.6999999999999993, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [131.0, "MPa"], "Trans. Stress": [294.0, "MPa"], "Trans. stress": [294.0, "MPa"], "Shear stress": [16.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [52.0, "MPa"], "Trans. Stress": [118.0, "MPa"], "Trans. stress": [118.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.73, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.76, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line17": {"Identification": "line17", "Plate geometry": {"Length of panel": [3600.0000000000014, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [375.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [3.6000000000000014, "mm"], "Stiffener tilt": [3.6000000000000014, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [138.0, "MPa"], "Trans. Stress": [311.0, "MPa"], "Trans. stress": [311.0, "MPa"], "Shear stress": [17.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [53.0, "MPa"], "Trans. Stress": [119.0, "MPa"], "Trans. stress": [119.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.72, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.76, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line18": {"Identification": "line18", "Plate geometry": {"Length of panel": [3500.0, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [375.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [3.5, "mm"], "Stiffener tilt": [3.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [146.0, "MPa"], "Trans. Stress": [329.0, "MPa"], "Trans. stress": [329.0, "MPa"], "Shear stress": [18.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [53.0, "MPa"], "Trans. Stress": [120.0, "MPa"], "Trans. stress": [120.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.71, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [32.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.75, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line19": {"Identification": "line19", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [375.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [124.0, "MPa"], "Trans. Stress": [279.0, "MPa"], "Trans. stress": [279.0, "MPa"], "Shear stress": [15.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [52.0, "MPa"], "Trans. Stress": [117.0, "MPa"], "Trans. stress": [117.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.74, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.77, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line20": {"Identification": "line20", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [375.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [18.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [124.0, "MPa"], "Trans. Stress": [279.0, "MPa"], "Trans. stress": [279.0, "MPa"], "Shear stress": [15.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [52.0, "MPa"], "Trans. Stress": [117.0, "MPa"], "Trans. stress": [117.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.74, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.77, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line43": {"Identification": "line43", "Plate geometry": {"Length of panel": [3199.999999999999, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.1999999999999993, "mm"], "Stiffener tilt": [3.1999999999999993, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.393657, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [165.0, "MPa"], "Trans. Stress": [330.0, "MPa"], "Trans. stress": [330.0, "MPa"], "Shear stress": [21.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [64.0, "MPa"], "Trans. Stress": [128.0, "MPa"], "Trans. stress": [128.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [32.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.62, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line44": {"Identification": "line44", "Plate geometry": {"Length of panel": [3400.0000000000005, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4000000000000004, "mm"], "Stiffener tilt": [3.4000000000000004, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.348157, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [147.0, "MPa"], "Trans. Stress": [293.0, "MPa"], "Trans. stress": [293.0, "MPa"], "Shear stress": [18.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [63.0, "MPa"], "Trans. Stress": [126.0, "MPa"], "Trans. stress": [126.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.64, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line45": {"Identification": "line45", "Plate geometry": {"Length of panel": [3400.0000000000005, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4000000000000004, "mm"], "Stiffener tilt": [3.4000000000000004, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.299813, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [147.0, "MPa"], "Trans. Stress": [293.0, "MPa"], "Trans. stress": [293.0, "MPa"], "Shear stress": [18.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [63.0, "MPa"], "Trans. Stress": [126.0, "MPa"], "Trans. stress": [126.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.57, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.64, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line46": {"Identification": "line46", "Plate geometry": {"Length of panel": [3600.0000000000014, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.6000000000000014, "mm"], "Stiffener tilt": [3.6000000000000014, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.251469, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [130.0, "MPa"], "Trans. Stress": [261.0, "MPa"], "Trans. stress": [261.0, "MPa"], "Shear stress": [16.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [62.0, "MPa"], "Trans. Stress": [124.0, "MPa"], "Trans. stress": [124.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [29.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.65, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line47": {"Identification": "line47", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.200281, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [117.0, "MPa"], "Trans. Stress": [234.0, "MPa"], "Trans. stress": [234.0, "MPa"], "Shear stress": [15.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [61.0, "MPa"], "Trans. Stress": [122.0, "MPa"], "Trans. stress": [122.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [28.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.66, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line48": {"Identification": "line48", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.14625, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [106.0, "MPa"], "Trans. Stress": [212.0, "MPa"], "Trans. stress": [212.0, "MPa"], "Shear stress": [13.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [60.0, "MPa"], "Trans. Stress": [120.0, "MPa"], "Trans. stress": [120.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [27.0, "%"], "Global stiffener buckling": [6.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.66, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line49": {"Identification": "line49", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [325.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [16.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [80.0, "MPa"], "Trans. stress 2": [80.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.089375, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [106.0, "MPa"], "Trans. Stress": [212.0, "MPa"], "Trans. stress": [212.0, "MPa"], "Shear stress": [13.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [60.0, "MPa"], "Trans. Stress": [120.0, "MPa"], "Trans. stress": [120.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.57, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [27.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [34.0, "%"], "Web stiffener buckling": [34.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.66, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line1": {"Identification": "line1", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [20.0, "MPa"], "Trans. stress": [40.0, "MPa"], "Trans. stress 2": [40.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.47186, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [193.0, "MPa"], "Trans. Stress": [386.0, "MPa"], "Trans. stress": [386.0, "MPa"], "Shear stress": [48.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [61.0, "MPa"], "Trans. Stress": [121.0, "MPa"], "Trans. stress": [121.0, "MPa"], "Shear stress": [15.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.32, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [42.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [27.0, "%"], "Web stiffener buckling": [27.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.33, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line23": {"Identification": "line23", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [15.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [350.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.387068, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [169.0, "MPa"], "Trans. Stress": [381.0, "MPa"], "Trans. stress": [381.0, "MPa"], "Shear stress": [21.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [45.0, "MPa"], "Trans. Stress": [101.0, "MPa"], "Trans. stress": [101.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.8, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [39.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [29.0, "%"], "Web stiffener buckling": [29.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.89, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line24": {"Identification": "line24", "Plate geometry": {"Length of panel": [3200.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [350.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.2, "mm"], "Stiffener tilt": [3.2, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.349613, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [168.0, "MPa"], "Trans. Stress": [379.0, "MPa"], "Trans. stress": [379.0, "MPa"], "Shear stress": [21.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [58.0, "MPa"], "Trans. Stress": [132.0, "MPa"], "Trans. stress": [132.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.63, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.68, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line25": {"Identification": "line25", "Plate geometry": {"Length of panel": [3400.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [350.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4, "mm"], "Stiffener tilt": [3.4, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.309662, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [149.0, "MPa"], "Trans. Stress": [336.0, "MPa"], "Trans. stress": [336.0, "MPa"], "Shear stress": [19.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [57.0, "MPa"], "Trans. Stress": [129.0, "MPa"], "Trans. stress": [129.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.64, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [32.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.7, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line26": {"Identification": "line26", "Plate geometry": {"Length of panel": [3400.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [320.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.4, "mm"], "Stiffener tilt": [3.4, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.267214, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [136.0, "MPa"], "Trans. Stress": [305.0, "MPa"], "Trans. stress": [305.0, "MPa"], "Shear stress": [17.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [57.0, "MPa"], "Trans. Stress": [128.0, "MPa"], "Trans. stress": [128.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.63, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [32.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.7, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line27": {"Identification": "line27", "Plate geometry": {"Length of panel": [3600.0000000000014, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [15.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [320.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.6000000000000014, "mm"], "Stiffener tilt": [3.6000000000000014, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.224765, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [107.0, "MPa"], "Trans. Stress": [241.0, "MPa"], "Trans. stress": [241.0, "MPa"], "Shear stress": [13.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [41.0, "MPa"], "Trans. Stress": [92.0, "MPa"], "Trans. stress": [92.0, "MPa"], "Shear stress": [5.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.82, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [32.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.98, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line28": {"Identification": "line28", "Plate geometry": {"Length of panel": [3800.000000000001, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [15.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [320.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.800000000000001, "mm"], "Stiffener tilt": [3.800000000000001, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.17982, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [96.0, "MPa"], "Trans. Stress": [216.0, "MPa"], "Trans. stress": [216.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [40.0, "MPa"], "Trans. Stress": [90.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Shear stress": [5.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.82, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.0, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line29": {"Identification": "line29", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [15.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [300.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.132378, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [81.0, "MPa"], "Trans. Stress": [182.0, "MPa"], "Trans. stress": [182.0, "MPa"], "Shear stress": [10.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [39.0, "MPa"], "Trans. Stress": [88.0, "MPa"], "Trans. stress": [88.0, "MPa"], "Shear stress": [5.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.83, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.02, null], "Allowable usage factor": [1.0, null], "Status": ["Not ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line30": {"Identification": "line30", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [15.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [300.0, "mm"], "Web thick.": [12.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.082439, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [81.0, "MPa"], "Trans. Stress": [182.0, "MPa"], "Trans. stress": [182.0, "MPa"], "Shear stress": [10.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [39.0, "MPa"], "Trans. Stress": [88.0, "MPa"], "Trans. stress": [88.0, "MPa"], "Shear stress": [5.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.8, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.02, null], "Allowable usage factor": [1.0, null], "Status": ["Not ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line58": {"Identification": "line58", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line59": {"Identification": "line59", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line61": {"Identification": "line61", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line62": {"Identification": "line62", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line63": {"Identification": "line63", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line64": {"Identification": "line64", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line65": {"Identification": "line65", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line66": {"Identification": "line66", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line21": {"Identification": "line21", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [737.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [123.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [354.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.23, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [10.0, "%"], "Torsional stiffener buckling": [30.0, "%"], "Web stiffener buckling": [30.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.23, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line42": {"Identification": "line42", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line22": {"Identification": "line22", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line67": {"Identification": "line67", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line68": {"Identification": "line68", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line69": {"Identification": "line69", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line70": {"Identification": "line70", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line71": {"Identification": "line71", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line72": {"Identification": "line72", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line73": {"Identification": "line73", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1309.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [218.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [353.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [34.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [31.0, "%"], "Web stiffener buckling": [31.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line60": {"Identification": "line60", "Plate geometry": {"Length of panel": [2500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [14.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["Flatbar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [18.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [2.5, "mm"], "Stiffener tilt": [2.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Bound cond.": {"In-plane support": ["Girder - long", null]}, "Global elastic buckling": {"Axial stress": [1894.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [316.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [356.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Shear stress": [59.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [33.0, "%"], "Global stiffener buckling": [2.0, "%"], "Torsional stiffener buckling": [32.0, "%"], "Web stiffener buckling": [32.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.21, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["-", null], "Flange": ["-", null], "stiffness": ["Ok", null]}}, "line80": {"Identification": "line80", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line79": {"Identification": "line79", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line78": {"Identification": "line78", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line77": {"Identification": "line77", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line76": {"Identification": "line76", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line75": {"Identification": "line75", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line74": {"Identification": "line74", "Geometry": {"Plate length": [2400.0000000000005, "mm"], "Plate width": [800.0, "mm"], "Plate thick.": [18.0, "mm"]}, "Model imp.": {"Model plate imperf.": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield st. plate": [355.0, "MPa"], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [60.0, "MPa"], "Axial stress 2": [60.0, "MPa"], "Trans. Stress": [0.0, "MPa"], "Trans. Stress 2": [0.0, "MPa"], "Shear stress": [10.0, "MPa"], "Pressure (fixed)": [0.0, "MPa"]}, "Boundary conditions": {"In-plane support": ["Girder - long", null], "Rotational support": ["SS", "MNm/m"], "Rotational support 2": ["SS", "MNm/m"]}, "Elastic buckling": {"Axial stress": [380.0, "MPa"], "Axial stress 2": [380.0, "MPa"], "Trans. stress": [0.0, "MPa"], "Trans. stress 2": [0.0, "MPa"], "Shear stress": [63.0, "MPa"]}, "Ultimate capacity": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Buckling strength": {"Status": ["Ok", null], "Actual usage Factor": [0.22, null], "Allowable usage factor": [1.0, null]}, "Geom. Req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank req": {"Plate slenderness": ["Ok", null]}}, "line10": {"Identification": "line10", "Plate geometry": {"Length of panel": [3800.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [25.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.8000000000000003, "mm"], "Stiffener tilt": [3.8000000000000003, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [50.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.487211, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [207.0, "MPa"], "Trans. Stress": [413.0, "MPa"], "Trans. stress": [413.0, "MPa"], "Shear stress": [21.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [117.0, "MPa"], "Trans. Stress": [233.0, "MPa"], "Trans. stress": [233.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [24.0, "%"], "Global stiffener buckling": [5.0, "%"], "Torsional stiffener buckling": [36.0, "%"], "Web stiffener buckling": [36.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line11": {"Identification": "line11", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [25.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [500.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [50.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.521418, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [241.0, "MPa"], "Trans. Stress": [481.0, "MPa"], "Trans. stress": [481.0, "MPa"], "Shear stress": [24.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [116.0, "MPa"], "Trans. Stress": [232.0, "MPa"], "Trans. stress": [232.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [21.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [38.0, "%"], "Web stiffener buckling": [38.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line12": {"Identification": "line12", "Plate geometry": {"Length of panel": [3905.1200000000003, "mm"], "Stiffener spacing": [750.0, "mm"], "Plate thick.": [25.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [500.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.75, "mm"], "Stiffener": [3.9051200000000006, "mm"], "Stiffener tilt": [3.9051200000000006, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [50.0, "MPa"], "Trans. stress": [100.0, "MPa"], "Trans. stress 2": [100.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.557214, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [252.0, "MPa"], "Trans. Stress": [504.0, "MPa"], "Trans. stress": [504.0, "MPa"], "Shear stress": [25.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [117.0, "MPa"], "Trans. Stress": [234.0, "MPa"], "Trans. stress": [234.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [21.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [38.0, "%"], "Web stiffener buckling": [38.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.45, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line34": {"Identification": "line34", "Plate geometry": {"Length of panel": [3700.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [12.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [14.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.7, "mm"], "Stiffener tilt": [3.7, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [81.0, "MPa"], "Trans. Stress": [142.0, "MPa"], "Trans. stress": [142.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [38.0, "MPa"], "Trans. Stress": [67.0, "MPa"], "Trans. stress": [67.0, "MPa"], "Shear stress": [3.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.71, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [30.0, "%"], "Global stiffener buckling": [4.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.04, null], "Allowable usage factor": [1.0, null], "Status": ["Not ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line35": {"Identification": "line35", "Plate geometry": {"Length of panel": [3600.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [12.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [14.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.6, "mm"], "Stiffener tilt": [3.6, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [86.0, "MPa"], "Trans. Stress": [151.0, "MPa"], "Trans. stress": [151.0, "MPa"], "Shear stress": [6.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [39.0, "MPa"], "Trans. Stress": [68.0, "MPa"], "Trans. stress": [68.0, "MPa"], "Shear stress": [3.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.7, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.03, null], "Allowable usage factor": [1.0, null], "Status": ["Not ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line36": {"Identification": "line36", "Plate geometry": {"Length of panel": [3500.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [12.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [250.0, "mm"], "Web thick.": [14.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [14.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.5, "mm"], "Stiffener tilt": [3.5, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [70.0, "MPa"], "Trans. stress 2": [70.0, "MPa"], "Shear stress": [3.0, "MPa"], "Pressure (fixed)": [0.0325, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [91.0, "MPa"], "Trans. Stress": [159.0, "MPa"], "Trans. stress": [159.0, "MPa"], "Shear stress": [7.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [39.0, "MPa"], "Trans. Stress": [69.0, "MPa"], "Trans. stress": [69.0, "MPa"], "Shear stress": [3.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.69, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [31.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [33.0, "%"], "Web stiffener buckling": [33.0, "%"]}, "Buckling strength": {"Actual usage Factor": [1.02, null], "Allowable usage factor": [1.0, null], "Status": ["Not ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line14": {"Identification": "line14", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [20.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [450.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [161.0, "MPa"], "Trans. Stress": [362.0, "MPa"], "Trans. stress": [362.0, "MPa"], "Shear stress": [20.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [66.0, "MPa"], "Trans. Stress": [148.0, "MPa"], "Trans. stress": [148.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [24.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [36.0, "%"], "Web stiffener buckling": [36.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.61, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line15": {"Identification": "line15", "Plate geometry": {"Length of panel": [4000.0, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [20.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [450.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [4.0, "mm"], "Stiffener tilt": [4.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [161.0, "MPa"], "Trans. Stress": [362.0, "MPa"], "Trans. stress": [362.0, "MPa"], "Shear stress": [20.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [66.0, "MPa"], "Trans. Stress": [148.0, "MPa"], "Trans. stress": [148.0, "MPa"], "Shear stress": [8.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.58, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [24.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [36.0, "%"], "Web stiffener buckling": [36.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.61, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line41": {"Identification": "line41", "Plate geometry": {"Length of panel": [5000.0, "mm"], "Stiffener spacing": [775.0, "mm"], "Plate thick.": [25.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [500.0, "mm"], "Web thick.": [25.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [25.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.875, "mm"], "Stiffener": [5.0, "mm"], "Stiffener tilt": [5.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [40.0, "MPa"], "Trans. stress": [90.0, "MPa"], "Trans. stress 2": [90.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.436313, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [146.0, "MPa"], "Trans. Stress": [328.0, "MPa"], "Trans. stress": [328.0, "MPa"], "Shear stress": [18.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [96.0, "MPa"], "Trans. Stress": [215.0, "MPa"], "Trans. stress": [215.0, "MPa"], "Shear stress": [12.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.43, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [20.0, "%"], "Global stiffener buckling": [7.0, "%"], "Torsional stiffener buckling": [37.0, "%"], "Web stiffener buckling": [37.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.43, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "line2": {"Identification": "line2", "Plate geometry": {"Length of panel": [3000.0, "mm"], "Stiffener spacing": [700.0, "mm"], "Plate thick.": [30.0, "mm"]}, "Primary stiffeners": {"Number of stiffeners": [10.0, null], "Stiffener type": ["T-bar", null], "Stiffener boundary": ["Cont", null], "Stiff. Height": [400.0, "mm"], "Web thick.": [20.0, "mm"], "Flange width": [150.0, "mm"], "Flange thick.": [20.0, "mm"], "Flange ecc.": [0.0, "mm"], "Tilt angle": [0.0, "degrees"]}, "Secondary stiffeners": {"Number of sec. stiffeners": [0.0, null], "Secondary stiffener type": ["Flatbar", null], "Stiffener boundary": ["SS", null], "Stiff. Height": [0.0, "mm"], "Web thick.": [0.0, "mm"], "Flange width": [0.0, "mm"], "Flange thick.": [0.0, "mm"]}, "Model imperfections": {"Imp. level": ["Default", null], "Plate": [3.5, "mm"], "Stiffener": [3.0, "mm"], "Stiffener tilt": [3.0, "mm"]}, "Material": {"Modulus of elasticity": [210000.0, "MPa"], "Poisson's ratio": [0.3, null], "Yield stress plate": [355.0, "MPa"], "Yield stress stiffener": [355.0, "MPa"]}, "Aluminium prop": {"HAZ pattern": ["-", null], "HAZ red. factor": ["-", null]}, "Applied loads": {"Axial stress": [20.0, "MPa"], "Trans. stress": [40.0, "MPa"], "Trans. stress 2": [40.0, "MPa"], "Shear stress": [5.0, "MPa"], "Pressure (fixed)": [0.387068, "MPa"]}, "Bound cond.": {"In-plane support": ["Integrated", null]}, "Global elastic buckling": {"Axial stress": [385.0, "MPa"], "Trans. Stress": [770.0, "MPa"], "Trans. stress": [770.0, "MPa"], "Shear stress": [96.0, "MPa"]}, "Local elastic buckling": {"Axial stress": [196.0, "MPa"], "Trans. Stress": [393.0, "MPa"], "Trans. stress": [393.0, "MPa"], "Shear stress": [49.0, "MPa"]}, "Ultimate capacity": {"Actual usage Factor": [0.13, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Failure modes": {"Plate buckling": [25.0, "%"], "Global stiffener buckling": [3.0, "%"], "Torsional stiffener buckling": [36.0, "%"], "Web stiffener buckling": [36.0, "%"]}, "Buckling strength": {"Actual usage Factor": [0.13, null], "Allowable usage factor": [1.0, null], "Status": ["Ok", null]}, "Local geom req (PULS validity limits)": {"Plate slenderness": ["Ok", null], "Web slend": ["Ok", null], "Web flange ratio": ["Ok", null], "Flange slend ": ["Ok", null], "Aspect ratio": ["Ok", null]}, "CSR-Tank requirements (primary stiffeners)": {"Plating": ["Ok", null], "Web": ["Ok", null], "Web-flange": ["Ok", null], "Flange": ["Ok", null], "stiffness": ["Ok", null]}}, "sheet location": "C:/Github/ANYstructure/ANYstructure_local/PULS/PulsExcel_new.xlsm"}, "shifting": {"shifted checked": false, "shift hor": 0.0, "shift ver": 0.0}, "Weight and COG": {"new structure": {"COG": [[22.153292540685463, 12.247422348847916], [22.19378070497761, 12.19756910341532], [22.24684556290065, 12.15423614083346], [22.274892233163097, 12.093782467835242], [22.29086617165397, 12.034587247857623], [22.29559601455664, 11.976677975622914], [22.587588989249152, 11.73911800423408], [22.345500037442914, 11.936077004789503], [22.393326249342444, 11.96360235121387], [22.43016886659481, 11.991288752117887], [22.293206311388015, 12.020040970974398], [22.245822901823157, 11.992439777438245], [22.209843383455073, 11.964998167990286], [22.209843383455073, 11.964998167990286], [22.209843383455073, 11.964998167990286], [22.209843383455073, 11.964998167990286], [22.209843383455073, 11.964998167990286], [22.209843383455073, 11.964998167990286]], "weight": [537783.5817240004, 539981.5817240004, 542127.4451640004, 540384.7451640003, 538689.1451640003, 537040.6451640002, 553525.6451640005, 539788.1451640003, 538218.1451640003, 536648.1451640002, 539945.1451640003, 541515.1451640003, 543085.1451640003, 543085.1451640003, 543085.1451640003, 543085.1451640003, 543085.1451640003, 543085.1451640003], "time": [1634729268.359102, 1634729271.9197326, 1634729275.1165059, 1634729278.627879, 1634729281.7719073, 1634729285.4754374, 1634729288.5186706, 1634729293.9605272, 1634729299.8497577, 1634729306.1878393, 1634729316.7696993, 1634729319.6903076, 1634729322.2575042, 1639394878.521544, 1639394888.9807885, 1639394968.2976687, 1639394977.9669144, 1639394981.5995214]}}}